EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Castrol

Castrol Magnatec 5W-40 C3

Castrol Magnatec 5W-40 C3 is a 5W-40 C3 engine oil (ACEA C3, A3/B4 · API SM, CF). According to the manufacturer's data sheet it has a viscosity of 79 mm²/s at 40 °C, 13.2 mm²/s at 100 °C, a TBN of 6.4 mg KOH/g, a pour point of −48 °C and sulphated ash of 0.7 %.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-40 C3 i
Viscosity 40 °C79 mm²/s84.9 mm²/s
Viscosity 100 °C13.2 mm²/s14 mm²/s
Viscosity indexnot stated
TBN6.4 mg KOH/g7.5 mg KOH/g
CCS −30 °Cnot stated
Pour point−48 °C−42 °C
Flash pointnot stated
Density0.851 g/cm³0.85 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA C3 requires at least 3.5 mPa·s.
Sulphated ash0.7 %0.8 %

All 5W-40 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C3, A3/B4 · API SM, CF
Oils by specification

Similar oils

Oils in the 5W-40 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 C3 class.

Castrol Magnatec 5W-40 C3 is a motor oil from Castrol, viscosity grade 5W-40. In the database we compare it with 66 other oils in the 5W-40 C3 class.

The oil meets ACEA C3, ACEA A3/B4, API SM, API CF and more (7 in total). ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s.

Viscosity at 100 °C is 13.2 mm²/s, near the lower end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thin side, which helps fuel economy.

Strengths: pour point −48 °C is among the best 10 % in the class (median −42).

Weaker values: TBN 6.4 mg KOH/g is among the weakest in the class (median 7.5).

Limit values: sulphated ash of 0.7 % is suitable for engines with a DPF.

Based on its values it suits engines with a DPF and everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS and Noack volatility, so we cannot compare it on these parameters.