EuropeUSA 910 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · ENEOS

ENEOS X PRIME SP/C3 5W-30

ENEOS X PRIME SP/C3 5W-30 is a 5W-30 C3 engine oil (ACEA C3 · API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 69.51 mm²/s at 40 °C, 11.83 mm²/s at 100 °C, a viscosity index of 167 and a pour point of −45 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 C3 i
Viscosity 40 °C69.51 mm²/s70 mm²/s
Viscosity 100 °C11.83 mm²/s12 mm²/s
Viscosity index167 168
TBNnot stated
CCS −30 °Cnot stated
Pour point−45 °C−42 °C
Flash point230 °C230 °C
Density0.849 g/cm³0.851 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA C3 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA C3 allows at most 0.8 %.

All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C3 · API SP · ILSAC GF-6A
Oils by specification

Notes on the data

  • Values are from the newer data sheet (11/2024) published by an ENEOS distributor. The official ENEOS Europe sheet (11/2023) gives identical values for 5W-30 and 5W-40, which is clearly an error.

Similar oils

Oils in the 5W-30 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.

ENEOS X PRIME SP/C3 5W-30 is a motor oil from ENEOS, viscosity grade 5W-30. In the database we compare it with 121 other oils in the 5W-30 C3 class.

The oil meets ACEA C3, API SP, ILSAC GF-6A. ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection.

Viscosity at 100 °C is 11.83 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: pour point −45 °C is in the top quarter of the class (median −42).

Average values: viscosity index 167 is close to the class middle (median 168); flash point 230 °C is close to the class middle (median 230).

Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.