EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Global Racing Oil

Global Racing Oil GXS 5W-40 C-3

Global Racing Oil GXS 5W-40 C-3 is a 5W-40 C3 engine oil (ACEA C2, C3 · API SN). According to the manufacturer's data sheet it has a viscosity of 90 mm²/s at 40 °C, 14 mm²/s at 100 °C, a viscosity index of 162 and a pour point of −51 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-40 C3 i
Viscosity 40 °C90 mm²/s84.9 mm²/s
Viscosity 100 °C14 mm²/s14 mm²/s
Viscosity index162 171
TBN7.9 mg KOH/gThe manufacturer gives only a limit, "at least 7.9", not a measured value.7.5 mg KOH/g
CCS −30 °Cnot stated
Pour point−51 °C−42 °C
Flash point225 °C226 °C
Density0.86 g/cm³0.85 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA C3 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA C2 allows at most 0.8 %.

All 5W-40 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C2, C3 · API SN
Oils by specification

Similar oils

Oils in the 5W-40 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 C3 class.

Global Racing Oil GXS 5W-40 C-3 is a motor oil from Global Racing Oil, viscosity grade 5W-40. In the database we compare it with 66 other oils in the 5W-40 C3 class.

The oil meets ACEA C2, ACEA C3, API SN, MB 229.31 and more (15 in total). ACEA C2 is a low-ash oil with reduced HTHS (from 2.9 mPa·s) for DPF engines where the carmaker wants lower friction. ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. API SN is an older American specification for petrol engines. MB 229.51 is the Mercedes-Benz approval for engines with a DPF. GM dexos2 is the GM (Opel) approval for engines with a DPF.

Viscosity at 100 °C is 14 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.

Strengths: pour point −51 °C is among the best 10 % in the class (median −42).

Weaker values: viscosity index 162 is among the weakest in the class (median 171); flash point 225 °C is in the weaker half of the class (median 226).

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.