EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol 7709 O.E.M. 5W-30

Mannol 7709 O.E.M. 5W-30 is a 5W-30 C3 engine oil (ACEA C2, C3, A5/B5 · API SN, CF). According to the manufacturer's data sheet it has a viscosity of 65.2 mm²/s at 40 °C, 11.32 mm²/s at 100 °C, a viscosity index of 168, a TBN of 10.22 mg KOH/g and a pour point of −42 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 C3 i
Viscosity 40 °C65.2 mm²/s70 mm²/s
Viscosity 100 °C11.32 mm²/s12 mm²/s
Viscosity index168 168
TBN10.22 mg KOH/g7.4 mg KOH/g
CCS −30 °C5420 mPa·s5881 mPa·s
Pour point−42 °C−42 °C
Flash point222 °C230 °C
Density0.85 g/cm³0.851 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA C3 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA C2 allows at most 0.8 %.

All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C2, C3, A5/B5 · API SN, CF
Oils by specification

Similar oils

Oils in the 5W-30 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.

Mannol 7709 O.E.M. 5W-30 is a motor oil from Mannol, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.

The oil meets API SN, API CF, ACEA C2, ACEA C3 and more (5 in total). API SN is an older American specification for petrol engines. ACEA C2 is a low-ash oil with reduced HTHS (from 2.9 mPa·s) for DPF engines where the carmaker wants lower friction. ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter.

Viscosity at 100 °C is 11.32 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: TBN 10.2 mg KOH/g is among the best 10 % in the class (median 7.4).

Average values: viscosity index 168 is close to the class middle (median 168); CCS 5420 mPa·s is close to the class middle (median 5850); pour point −42 °C is close to the class middle (median −42).

Weaker values: flash point 222 °C is in the weaker half of the class (median 230).

Limit values: CCS 5420 mPa·s at −30 °C is 82 % of the SAE limit (6600 mPa·s).

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.