EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol TS-17 UHPD Blue 5W-30

Mannol TS-17 UHPD Blue 5W-30 is a 5W-30 engine oil (ACEA E6, E7). According to the manufacturer's data sheet it has a viscosity of 69.2 mm²/s at 40 °C, 11.66 mm²/s at 100 °C, a viscosity index of 164, a TBN of 10.4 mg KOH/g and a pour point of −40 °C.

Data sheet ↗ Data verified: 10 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 i
Viscosity 40 °C69.2 mm²/s70.4 mm²/s
Viscosity 100 °C11.66 mm²/s11.8 mm²/s
Viscosity index164 164
TBN10.4 mg KOH/g10.4 mg KOH/g
CCS −30 °C6350 mPa·s6300 mPa·s
Pour point−40 °C−42 °C
Flash point224 °C226 °C
Density0.85 g/cm³0.853 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA E6 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA E6 allows at most 1 %.

All 5W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E6, E7
Oils by specification

Similar oils

Oils in the 5W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.

Mannol TS-17 UHPD Blue 5W-30 is a motor oil from Mannol, viscosity grade 5W-30. In the database we compare it with 19 other oils in the 5W-30 class.

The oil meets ACEA E6, ACEA E7, MB 228.51, MAN M3677 and more (5 in total). ACEA E6 is the European specification for heavy-duty diesel engines with a DPF and long drain intervals. ACEA E7 is the European specification for heavy-duty diesel engines without a DPF.

Viscosity at 100 °C is 11.66 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Average values: viscosity index 164 is close to the class middle (median 164); TBN 10.4 mg KOH/g is close to the class middle (median 10.6).

Weaker values: CCS 6350 mPa·s is in the weaker half of the class (median 6200); pour point −40 °C is among the weakest in the class (median −42); flash point 224 °C is in the weaker half of the class (median 228).

Limit values: CCS 6350 mPa·s at −30 °C is 96 % of the SAE limit (6600 mPa·s), leaving little cold-start reserve.

Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.