Mannol TS-8 UHPD Super 5W-30
Mannol TS-8 UHPD Super 5W-30 is a 5W-30 engine oil (ACEA E4, E7). According to the manufacturer's data sheet it has a viscosity of 77.2 mm²/s at 40 °C, 11.98 mm²/s at 100 °C, a viscosity index of 150, a TBN of 12.54 mg KOH/g and a pour point of −45 °C.
Data sheet ↗ Data verified: 10 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 i |
|---|---|---|
| Viscosity 40 °C | 77.2 mm²/s | 70.4 mm²/s |
| Viscosity 100 °C | 11.98 mm²/s | 11.8 mm²/s |
| Viscosity index | 150 | 164 |
| TBN | 12.54 mg KOH/g | 10.4 mg KOH/g |
| CCS −30 °C | 6580 mPa·s | 6300 mPa·s |
| Pour point | −45 °C | −42 °C |
| Flash point | 224 °C | 226 °C |
| Density | 0.85 g/cm³ | 0.853 g/cm³ |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA E4 requires at least 3.5 mPa·s. | |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA E4 allows at most 2 %. |
All 5W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
Similar oils
Oils in the 5W-30 class with the closest parameters and the same specification.
- Mobil Delvac 1 LE 5W-30ACEA E4, E7 · API CK-4, CJ-4, CI-4
- Motul Tekma Ultima+ 5W-30ACEA E4, E6, E7, E9 · API CK-4
- TotalEnergies Rubia TIR 9900 FE 5W-30ACEA E4, E6, E7, E9 · API CJ-4, CI-4, CH-4
- Petronas Urania Prime Long Drain 5W-30ACEA E4
- Repsol Giant 9660 LS-FE-LL 5W-30ACEA E4, E6, E7, E9 · API CK-4
- Eni i-Sigma top 5W-30ACEA E4, E7 · API CI-4
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.
Mannol TS-8 UHPD Super 5W-30 is a motor oil from Mannol, viscosity grade 5W-30. In the database we compare it with 19 other oils in the 5W-30 class.
The oil meets ACEA E4, ACEA E7, MB 228.5, Deutz DQC IV-10 and more (5 in total). ACEA E7 is the European specification for heavy-duty diesel engines without a DPF.
Viscosity at 100 °C is 11.98 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.
Strengths: pour point −45 °C is in the top quarter of the class (median −42).
Average values: TBN 12.5 mg KOH/g is close to the class middle (median 10.6).
Weaker values: viscosity index 150 is among the weakest in the class (median 164); CCS 6580 mPa·s is among the weakest in the class (median 6200); flash point 224 °C is in the weaker half of the class (median 228).
Limit values: CCS 6580 mPa·s at −30 °C is 100 % of the SAE limit (6600 mPa·s), leaving little cold-start reserve.
Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.