Penrite Enviro+ 5W-30
Penrite Enviro+ 5W-30 is a 5W-30 C3 engine oil (ACEA C3 · API SP). According to the manufacturer's data sheet it has a viscosity of 68.3 mm²/s at 40 °C, 11.7 mm²/s at 100 °C, a viscosity index of 169, a TBN of 6.62 mg KOH/g and sulphated ash of 0.7 %.
Data sheet ↗ Data verified: 8 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 C3 i |
|---|---|---|
| Viscosity 40 °C | 68.3 mm²/s | 70 mm²/s |
| Viscosity 100 °C | 11.7 mm²/s | 12 mm²/s |
| Viscosity index | 169 | 168 |
| TBN | 6.62 mg KOH/g | 7.4 mg KOH/g |
| CCS −30 °C | 5906 mPa·s | 5881 mPa·s |
| Pour point | not stated | |
| Flash point | not stated | |
| Density | 0.852 g/cm³ | 0.851 g/cm³ |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA C3 requires at least 3.5 mPa·s. | |
| Sulphated ash | 0.7 % | 0.795 % |
All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA C3 · API SP
- Oils by specification
Similar oils
Oils in the 5W-30 C3 class with the closest parameters and the same specification.
- ELF EVOLUTION FULL-TECH LLX 5W-30ACEA C3
- TOTAL QUARTZ INEO LONG LIFE 5W-30ACEA C3 · API SN/CF
- YACCO LUBE O 5W-30ACEA C3 · API SN/CF
- Gulf Formula ULE 5W-30ACEA C3 · API SN
- TITAN GT1 PRO C-3 SAE 5W-30 XTLACEA C3
- Selénia Multipower C3 5W-30ACEA C3
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.
Penrite Enviro+ 5W-30 is a motor oil from Penrite, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.
The oil meets ACEA C3, API SP, VW 504 00, VW 507 00 and more (10 in total). ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). VW 504 00 / 507 00 are VW Group approvals for engines with extended LongLife service intervals. MB 229.51 is the Mercedes-Benz approval for engines with a DPF.
Viscosity at 100 °C is 11.7 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.
Average values: viscosity index 169 is close to the class middle (median 168); CCS 5906 mPa·s is close to the class middle (median 5850).
Weaker values: TBN 6.6 mg KOH/g is in the weaker half of the class (median 7.4).
Limit values: CCS 5906 mPa·s at −30 °C is 89 % of the SAE limit (6600 mPa·s); sulphated ash of 0.7 % is suitable for engines with a DPF.
Based on its values it suits engines with a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS and Noack volatility, so we cannot compare it on these parameters.