Repsol Elite Evolution 5W-40
Repsol Elite Evolution 5W-40 is a 5W-40 C3 engine oil (ACEA C3 · API SN, CF). According to the manufacturer's data sheet it has a viscosity of 88 mm²/s at 40 °C, 14.5 mm²/s at 100 °C, a viscosity index of 170, a TBN of 7.5 mg KOH/g and a pour point of −39 °C.
Data sheet ↗ Data verified: 8 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-40 C3 i |
|---|---|---|
| Viscosity 40 °C | 88 mm²/s | 84.9 mm²/s |
| Viscosity 100 °C | 14.5 mm²/s | 14 mm²/s |
| Viscosity index | 170 | 171 |
| TBN | 7.5 mg KOH/g | 7.5 mg KOH/g |
| CCS −30 °C | 6600 mPa·sThe manufacturer gives only a limit, "at most 6600", not a measured value. | 6068 mPa·s |
| Pour point | −39 °C | −42 °C |
| Flash point | 215 °CThe manufacturer gives only a limit, "at least 215", not a measured value. | 226 °C |
| Density | 0.853 g/cm³ | 0.85 g/cm³ |
| HTHS 150 °C | 3.5 mPa·sThe manufacturer gives only a limit, "more than 3.5", not a measured value. | 3.6 mPa·s |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA C3 allows at most 0.8 %. |
All 5W-40 C3 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA C3 · API SN, CF
- Oils by specification
Similar oils
Oils in the 5W-40 C3 class with the closest parameters and the same specification.
- REPSOL ELITE 50501 TDI 5W-40ACEA C3
- Motorex SELECT SP-X 5W-40ACEA C3 · API SN
- Eurol Fluence 5W-40ACEA C3 · API SN, CF
- Motorex Select SP-X SAE 5W-40 (2)ACEA C3 · API SN
- LIQUI MOLY Diesel High Tech 5W-40ACEA C3
- LIQUI MOLY Top Tec 4100 5W-40ACEA C3 · API SQ
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 C3 class.
Repsol Elite Evolution 5W-40 is a motor oil from Repsol, viscosity grade 5W-40. In the database we compare it with 66 other oils in the 5W-40 C3 class.
The oil meets ACEA C3, API SN, API CF, MB 229.51 and more (11 in total). ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. API SN is an older American specification for petrol engines. MB 229.51 is the Mercedes-Benz approval for engines with a DPF. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 14.5 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.
Average values: TBN 7.5 mg KOH/g is close to the class middle (median 7.5).
Weaker values: viscosity index 170 is in the weaker half of the class (median 171); pour point −39 °C is in the weaker half of the class (median −42).
The data sheet does not state Noack volatility and sulphated ash, so we cannot compare it on these parameters.