EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Xenum

XENUM VRX 5W-30

XENUM VRX 5W-30 is a 5W-30 C3 engine oil (ACEA C3, A3/B4 · API SN, CF). According to the manufacturer's data sheet it has a viscosity of 73.7 mm²/s at 40 °C, 12.3 mm²/s at 100 °C, a viscosity index of 165, a TBN of 7.7 mg KOH/g and a pour point of −42 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 C3 i
Viscosity 40 °C73.7 mm²/s70 mm²/s
Viscosity 100 °C12.3 mm²/s12 mm²/s
Viscosity index165 168
TBN7.7 mg KOH/g7.4 mg KOH/g
CCS −30 °Cnot stated
Pour point−42 °C−42 °C
Flash point222 °C230 °C
Density0.855 g/cm³0.851 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA C3 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA C3 allows at most 0.8 %.

All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C3, A3/B4 · API SN, CF
Oils by specification

Similar oils

Oils in the 5W-30 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.

XENUM VRX 5W-30 is a motor oil from Xenum, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.

The oil meets ACEA C3, ACEA A3/B4, API SN, API CF. ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s. API SN is an older American specification for petrol engines.

Viscosity at 100 °C is 12.3 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Average values: TBN 7.7 mg KOH/g is close to the class middle (median 7.4); pour point −42 °C is close to the class middle (median −42).

Weaker values: viscosity index 165 is in the weaker half of the class (median 168); flash point 222 °C is in the weaker half of the class (median 230).

Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.