EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Fuchs

FUCHS TITAN GT1 FLEX 3 5W-40

FUCHS TITAN GT1 FLEX 3 5W-40 is a 5W-40 C3 engine oil (ACEA C3 · API SN). According to the manufacturer's data sheet it has a viscosity of 72.6 mm²/s at 40 °C, 13.1 mm²/s at 100 °C, a viscosity index of 185 and a pour point of −42 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-40 C3 i
Viscosity 40 °C72.6 mm²/s84.9 mm²/s
Viscosity 100 °C13.1 mm²/s14 mm²/s
Viscosity index185 171
TBN8 mg KOH/gThe manufacturer gives only a limit, "at least 8", not a measured value.7.5 mg KOH/g
CCS −30 °Cnot stated
Pour point−42 °C−42 °C
Flash pointnot stated
Density0.85 g/cm³0.85 g/cm³
HTHS 150 °C3.5 mPa·sThe manufacturer gives only a limit, "at least 3.5", not a measured value.3.6 mPa·s
Sulphated ash0.8 %The manufacturer gives only a limit, "at most 0.8", not a measured value.0.8 %

All 5W-40 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C3 · API SN
Oils by specification

Similar oils

Oils in the 5W-40 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 C3 class.

FUCHS TITAN GT1 FLEX 3 5W-40 is a motor oil from Fuchs, viscosity grade 5W-40. In the database we compare it with 66 other oils in the 5W-40 C3 class.

The oil meets ACEA C3, API SN, BMW LL-04, MB 226.5 and more (11 in total). ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. API SN is an older American specification for petrol engines. MB 229.51 is the Mercedes-Benz approval for engines with a DPF. Renault RN0700 and RN0710 are Renault/Dacia approvals for petrol and older diesel engines.

Viscosity at 100 °C is 13.1 mm²/s, near the lower end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thin side, which helps fuel economy.

Strengths: viscosity index 185 is among the best 10 % in the class (median 171).

Average values: pour point −42 °C is close to the class middle (median −42).

Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility, so we cannot compare it on this parameter.