EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Ravenol

RAVENOL RUP Racing Ultra Performance SAE 5W-40

RAVENOL RUP Racing Ultra Performance SAE 5W-40 is a 5W-40 C3 engine oil (ACEA C3 · API SP). According to the manufacturer's data sheet it has a viscosity of 73.3 mm²/s at 40 °C, 13.2 mm²/s at 100 °C, a viscosity index of 185, HTHS of 3.9 mPa·s, a TBN of 9.5 mg KOH/g, a pour point of −51 °C and sulphated ash of 0.73 %.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-40 C3 i
Viscosity 40 °C73.3 mm²/s84.9 mm²/s
Viscosity 100 °C13.2 mm²/s14 mm²/s
Viscosity index185 171
TBN9.5 mg KOH/g7.5 mg KOH/g
CCS −30 °C4510 mPa·s6068 mPa·s
Pour point−51 °C−42 °C
Flash point230 °C226 °C
Density0.846 g/cm³Density is given at 20 °C (most manufacturers state it at 15 °C).0.85 g/cm³
HTHS 150 °C3.9 mPa·s3.6 mPa·s
Sulphated ash0.73 %0.8 %
Noack volatility6 %

All 5W-40 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C3 · API SP
Oils by specification

Similar oils

Oils in the 5W-40 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 C3 class.

RAVENOL RUP Racing Ultra Performance SAE 5W-40 is a motor oil from Ravenol, viscosity grade 5W-40. In the database we compare it with 66 other oils in the 5W-40 C3 class.

The oil meets ACEA C3, API SP, BMW LL-04, GM dexos2 and more (6 in total). ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). MB 229.51 is the Mercedes-Benz approval for engines with a DPF. GM dexos2 is the GM (Opel) approval for engines with a DPF.

Viscosity at 100 °C is 13.2 mm²/s, near the lower end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thin side, which helps fuel economy.

Strengths: viscosity index 185 is among the best 10 % in the class (median 171); HTHS 3.9 mPa·s is among the best 10 % in the class (median 3.7); TBN 9.5 mg KOH/g is among the best 10 % in the class (median 7.5); CCS 4510 mPa·s is among the best 10 % in the class (median 5870); pour point −51 °C is among the best 10 % in the class (median −42).

Average values: flash point 230 °C is close to the class middle (median 226).

Limit values: HTHS 3.9 mPa·s meets the 3.5 mPa·s minimum required for this class; CCS 4510 mPa·s at −30 °C is 68 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve; sulphated ash of 0.73 % is suitable for engines with a DPF.

Based on its values it suits engines with a DPF, everyday driving where fuel economy matters most and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.