EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Fuchs

FUCHS TITAN GT1 PRO C-3 5W-30

FUCHS TITAN GT1 PRO C-3 5W-30 is a 5W-30 C3 engine oil (ACEA C3). According to the manufacturer's data sheet it has a viscosity of 69 mm²/s at 40 °C, 11.93 mm²/s at 100 °C, a viscosity index of 170 and a pour point of −42 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 C3 i
Viscosity 40 °C69 mm²/s70 mm²/s
Viscosity 100 °C11.93 mm²/s12 mm²/s
Viscosity index170 168
TBNnot stated
CCS −30 °Cnot stated
Pour point−42 °C−42 °C
Flash pointnot stated
Density0.852 g/cm³0.851 g/cm³
HTHS 150 °C3.5 mPa·sThe manufacturer gives only a limit, "at least 3.5", not a measured value.3.5 mPa·s
Sulphated ash0.8 %The manufacturer gives only a limit, "at most 0.8", not a measured value.0.795 %

All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C3
Oils by specification

Similar oils

Oils in the 5W-30 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.

FUCHS TITAN GT1 PRO C-3 5W-30 is a motor oil from Fuchs, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.

The oil meets ACEA C3, BMW LL-04, MB 229.51, Porsche C30 and more (6 in total). ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. VW 504 00 / 507 00 are VW Group approvals for engines with extended LongLife service intervals. MB 229.51 is the Mercedes-Benz approval for engines with a DPF.

Viscosity at 100 °C is 11.93 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Average values: viscosity index 170 is close to the class middle (median 168); pour point −42 °C is close to the class middle (median −42).

Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state TBN and Noack volatility, so we cannot compare it on these parameters.