RAVENOL SMP SAE 5W-30
RAVENOL SMP SAE 5W-30 is a 5W-30 C3 engine oil (ACEA C3 · API SN). According to the manufacturer's data sheet it has a viscosity of 70.4 mm²/s at 40 °C, 11.95 mm²/s at 100 °C, a viscosity index of 167, HTHS of 3.63 mPa·s, a TBN of 8.4 mg KOH/g, a pour point of −42 °C and sulphated ash of 0.7 %.
Data sheet ↗ Data verified: 8 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 C3 i |
|---|---|---|
| Viscosity 40 °C | 70.4 mm²/s | 70 mm²/s |
| Viscosity 100 °C | 11.95 mm²/s | 12 mm²/s |
| Viscosity index | 167 | 168 |
| TBN | 8.4 mg KOH/g | 7.4 mg KOH/g |
| CCS −30 °C | 5000 mPa·s | 5881 mPa·s |
| Pour point | −42 °C | −42 °C |
| Flash point | 233 °C | 230 °C |
| Density | 0.844 g/cm³Density is given at 20 °C (most manufacturers state it at 15 °C). | 0.851 g/cm³ |
| HTHS 150 °C | 3.63 mPa·s | 3.5 mPa·s |
| Sulphated ash | 0.7 % | 0.795 % |
| Noack volatility | 9.8 % |
All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
Similar oils
Oils in the 5W-30 C3 class with the closest parameters and the same specification.
- Motul Specific dexos2 5W-30ACEA C3 · API SN/CF
- FUCHS TITAN GT1 PRO C-3 5W-30ACEA C3
- Rowe HIGHTEC SYNT RS SAE 5W-30 HC-C3/C4ACEA C3, C4
- Petro-Canada Supreme C3 Synthetic 5W-30ACEA C3 · API SN
- ARAL SUPER TRONIC LONGLIFE III 5W-30ACEA C3
- Motorex PROFILE RN-T SAE 5W-30ACEA C3, C2 · API SP
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.
RAVENOL SMP SAE 5W-30 is a motor oil from Ravenol, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.
The oil meets ACEA C3, API SN, BMW LL-04, MB 229.51 and more (7 in total). ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. API SN is an older American specification for petrol engines. VW 504 00 / 507 00 are VW Group approvals for engines with extended LongLife service intervals. MB 229.51 is the Mercedes-Benz approval for engines with a DPF.
Viscosity at 100 °C is 11.95 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.
Strengths: HTHS 3.6 mPa·s is among the best 10 % in the class (median 3.5); TBN 8.4 mg KOH/g is in the top quarter of the class (median 7.4); CCS 5000 mPa·s is among the best 10 % in the class (median 5850).
Average values: viscosity index 167 is close to the class middle (median 168); pour point −42 °C is close to the class middle (median −42); flash point 233 °C is close to the class middle (median 230).
Weaker values: Noack volatility 9.8 % is among the weakest in the class (median 9).
Limit values: HTHS 3.6 mPa·s meets the 3.5 mPa·s minimum required for this class; CCS 5000 mPa·s at −30 °C is 76 % of the SAE limit (6600 mPa·s); sulphated ash of 0.7 % is suitable for engines with a DPF.
Based on its values it suits engines with a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.