EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Global Racing Oil

Global Racing Oil GXS 5W-30 C-3

Global Racing Oil GXS 5W-30 C-3 is a 5W-30 C3 engine oil (ACEA C2, C3 · API SN). According to the manufacturer's data sheet it has a viscosity of 70 mm²/s at 40 °C, 12 mm²/s at 100 °C, a viscosity index of 170 and a pour point of −51 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 C3 i
Viscosity 40 °C70 mm²/s70 mm²/s
Viscosity 100 °C12 mm²/s12 mm²/s
Viscosity index170 168
TBN7.9 mg KOH/gThe manufacturer gives only a limit, "at least 7.9", not a measured value.7.4 mg KOH/g
CCS −30 °Cnot stated
Pour point−51 °C−42 °C
Flash point210 °C230 °C
Density0.86 g/cm³0.851 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA C3 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA C2 allows at most 0.8 %.

All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C2, C3 · API SN
Oils by specification

Similar oils

Oils in the 5W-30 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.

Global Racing Oil GXS 5W-30 C-3 is a motor oil from Global Racing Oil, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.

The oil meets ACEA C2, ACEA C3, API SN, MB 229.31 and more (15 in total). ACEA C2 is a low-ash oil with reduced HTHS (from 2.9 mPa·s) for DPF engines where the carmaker wants lower friction. ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. API SN is an older American specification for petrol engines. MB 229.51 is the Mercedes-Benz approval for engines with a DPF. GM dexos2 is the GM (Opel) approval for engines with a DPF.

Viscosity at 100 °C is 12 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: pour point −51 °C is among the best 10 % in the class (median −42).

Average values: viscosity index 170 is close to the class middle (median 168).

Weaker values: flash point 210 °C is in the weaker half of the class (median 230).

Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.