EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Liqui Moly

Liqui Moly Motorbike 4T Synth 10W-50 Street Race

Liqui Moly Motorbike 4T Synth 10W-50 Street Race is a 10W-50 engine oil (API SP · JASO MA2). According to the manufacturer's data sheet it has a viscosity of 124 mm²/s at 40 °C, 18.5 mm²/s at 100 °C, a viscosity index of 165, a TBN of 7 mg KOH/g, a pour point of −39 °C and sulphated ash of 0.8 %.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-50 i
Viscosity 40 °C124 mm²/s119.35 mm²/s
Viscosity 100 °C18.5 mm²/s17.95 mm²/s
Viscosity index165 167
TBN7 mg KOH/g7.5 mg KOH/g
CCS −25 °C7000 mPa·sThe manufacturer gives only a limit, "at most 7000", not a measured value.6000 mPa·s
Pour point−39 °C−33 °C
Flash point230 °C227 °C
Density0.85 g/cm³0.857 g/cm³
HTHS 150 °C3.7 mPa·sThe manufacturer gives only a limit, "at least 3.7", not a measured value.4.7 mPa·s
Sulphated ash0.8 %
Noack volatility4.5 %

All 10W-50 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SP · JASO MA2
Oils by specification

Similar oils

Oils in the 10W-50 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-50 class.

Liqui Moly Motorbike 4T Synth 10W-50 Street Race is a motorcycle oil from Liqui Moly, viscosity grade 10W-50. In the database we compare it with 7 other oils in the 10W-50 class.

The oil meets API SP, JASO MA2. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). JASO MA2 means the oil is also suitable for motorcycles with a wet clutch.

Viscosity at 100 °C is 18.5 mm²/s, in the middle of the 16.3–21.9 mm²/s range for the summer grade 50.

Strengths: pour point −39 °C is in the top quarter of the class (median −33).

Average values: flash point 230 °C is close to the class middle (median 232).

Weaker values: viscosity index 165 is among the weakest in the class (median 167); TBN 7 mg KOH/g is among the weakest in the class (median 7.5).

Limit values: sulphated ash of 0.8 % is suitable for engines with a DPF.

Based on its values it suits engines with a DPF. The specification or approval in your vehicle manual always has the final word.