LIQUI MOLY Top Tec 4400 5W-30
LIQUI MOLY Top Tec 4400 5W-30 is a 5W-30 C3 engine oil (ACEA C4). According to the manufacturer's data sheet it has a viscosity of 70 mm²/s at 40 °C, 12 mm²/s at 100 °C, a viscosity index of 169, a TBN of 7.6 mg KOH/g and a pour point of −39 °C.
Data sheet ↗ Data verified: 8 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 C3 i |
|---|---|---|
| Viscosity 40 °C | 70 mm²/s | 70 mm²/s |
| Viscosity 100 °C | 12 mm²/s | 12 mm²/s |
| Viscosity index | 169 | 168 |
| TBN | 7.6 mg KOH/g | 7.4 mg KOH/g |
| CCS −30 °C | 6600 mPa·sThe manufacturer gives only a limit, "at most 6600", not a measured value. | 5881 mPa·s |
| Pour point | −39 °C | −42 °C |
| Flash point | 220 °C | 230 °C |
| Density | 0.85 g/cm³ | 0.851 g/cm³ |
| HTHS 150 °C | 3.5 mPa·sThe manufacturer gives only a limit, "at least 3.5", not a measured value. | 3.5 mPa·s |
| Sulphated ash | 0.5 %The manufacturer gives only a limit, "at most 0.5", not a measured value. | 0.795 % |
| Noack volatility | 9.2 % |
All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA C4
- Oils by specification
Similar oils
Oils in the 5W-30 C3 class with the closest parameters and the same specification.
- ELF EVOLUTION FULL-TECH FE 5W-30ACEA C4, C3
- ARAL SUPER TRONIC LONGLIFE III 5W-30ACEA C3
- Eurol Fluence DXS 5W-30ACEA C2, C3 · API SQ, SP, CF; ILSAC GF-6A
- Motorex PROFILE RN-T SAE 5W-30ACEA C3, C2 · API SP
- Motul Specific dexos2 5W-30ACEA C3 · API SN/CF
- FUCHS TITAN GT1 PRO C-3 5W-30ACEA C3
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.
LIQUI MOLY Top Tec 4400 5W-30 is a motor oil from Liqui Moly, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.
The oil meets ACEA C4, Renault RN0720. ACEA C4 is a low-ash oil (max 0.5 % ash) with HTHS from 3.5 mPa·s, typical for Renault and Mercedes. Renault RN0720 is the Renault approval for diesel engines with a DPF.
Viscosity at 100 °C is 12 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.
Average values: viscosity index 169 is close to the class middle (median 168); TBN 7.6 mg KOH/g is close to the class middle (median 7.4); Noack volatility 9.2 % is close to the class middle (median 9).
Weaker values: pour point −39 °C is in the weaker half of the class (median −42); flash point 220 °C is in the weaker half of the class (median 230).
Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.