EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol Motorbike 4-Takt HD 20W-50

Mannol Motorbike 4-Takt HD 20W-50 is a 20W-50 engine oil (API SL · JASO MA, MA2). According to the manufacturer's data sheet it has a viscosity of 148 mm²/s at 40 °C, 16.8 mm²/s at 100 °C, a viscosity index of 122, a TBN of 5.86 mg KOH/g and a pour point of −30 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 20W-50 i
Viscosity 40 °C148 mm²/s154.8 mm²/s
Viscosity 100 °C16.8 mm²/s18.1 mm²/s
Viscosity index122 128
TBN5.86 mg KOH/g6.85 mg KOH/g
CCS −15 °C8850 mPa·s7177.5 mPa·s
Pour point−30 °C−30 °C
Flash point228 °C236 °C
Density0.89 g/cm³0.883 g/cm³
HTHS 150 °Cnot stated
Sulphated ashnot stated

All 20W-50 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SL · JASO MA, MA2
Oils by specification

Similar oils

Oils in the 20W-50 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 20W-50 class.

Mannol Motorbike 4-Takt HD 20W-50 is a motorcycle oil from Mannol, viscosity grade 20W-50. In the database we compare it with 6 other oils in the 20W-50 class.

The oil meets API SL, JASO MA, JASO MA2. JASO MA2 means the oil is also suitable for motorcycles with a wet clutch.

Viscosity at 100 °C is 16.8 mm²/s, near the lower end of the 16.3–21.9 mm²/s range for the summer grade 50. Within its class the oil is on the thin side, which helps fuel economy.

Average values: pour point −30 °C is close to the class middle (median −30).

Weaker values: viscosity index 122 is among the weakest in the class (median 128); TBN 5.9 mg KOH/g is in the weaker half of the class (median 6.8); flash point 228 °C is among the weakest in the class (median 240).

Limit values: CCS 8850 mPa·s at −15 °C is 93 % of the SAE limit (9500 mPa·s), leaving little cold-start reserve.

Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.