Mannol Powerbike 4-Takt 15W-50
Mannol Powerbike 4-Takt 15W-50 is a 15W-50 engine oil (API SM · JASO MA, MA2). According to the manufacturer's data sheet it has a viscosity of 140.13 mm²/s at 40 °C, 17.21 mm²/s at 100 °C, a viscosity index of 134, a TBN of 7.14 mg KOH/g and a pour point of −30 °C.
Data sheet ↗ Data verified: 8 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 15W-50 i |
|---|---|---|
| Viscosity 40 °C | 140.13 mm²/s | 134.5 mm²/s |
| Viscosity 100 °C | 17.21 mm²/s | 18.2 mm²/s |
| Viscosity index | 134 | 153.5 |
| TBN | 7.14 mg KOH/g | 7.85 mg KOH/g |
| CCS −20 °C | 6950 mPa·s | 6050 mPa·s |
| Pour point | −30 °C | −33 °C |
| Flash point | 228 °C | 233.5 °C |
| Density | 0.89 g/cm³ | 0.868 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated |
All 15W-50 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
Similar oils
Oils in the 15W-50 class with the closest parameters and the same specification.
- Motorex Racing Pro 4T 15W-50
- Motul 7100 4T 15W-50JASO MA2 · API SN, SM, SL, SJ, SH, SG
- Silkolene Comp 4 XP 15W-50JASO MA2 · API SN
- Motul 3000 4T 15W-50JASO MA · API SG, SJ, CF
- Repsol Moto Rider 4T 15W-50JASO MA, MA2 · API SL
- Q8 Allroads 4T 15W-50JASO MA2 · API SL
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 15W-50 class.
Mannol Powerbike 4-Takt 15W-50 is a motorcycle oil from Mannol, viscosity grade 15W-50. In the database we compare it with 15 other oils in the 15W-50 class.
The oil meets API SM, JASO MA, JASO MA2. JASO MA2 means the oil is also suitable for motorcycles with a wet clutch.
Viscosity at 100 °C is 17.21 mm²/s, near the lower end of the 16.3–21.9 mm²/s range for the summer grade 50. Within its class the oil is on the thin side, which helps fuel economy.
Weaker values: viscosity index 134 is among the weakest in the class (median 154); TBN 7.1 mg KOH/g is in the weaker half of the class (median 7.8); CCS 6950 mPa·s is among the weakest in the class (median 5703); pour point −30 °C is among the weakest in the class (median −33); flash point 228 °C is among the weakest in the class (median 236).
Limit values: CCS 6950 mPa·s at −20 °C is 99 % of the SAE limit (7000 mPa·s), leaving little cold-start reserve.
Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.