EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol Quad 4-Takt Racing 10W-40

Mannol Quad 4-Takt Racing 10W-40 is a 10W-40 engine oil (API SL, CF · JASO MA, MA2). According to the manufacturer's data sheet it has a viscosity of 89.4 mm²/s at 40 °C, 13.4 mm²/s at 100 °C, a viscosity index of 150, a TBN of 5.74 mg KOH/g and a pour point of −38 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-40 i
Viscosity 40 °C89.4 mm²/s91 mm²/s
Viscosity 100 °C13.4 mm²/s14.18 mm²/s
Viscosity index150 156.5
TBN5.74 mg KOH/g7 mg KOH/g
CCS −25 °C5850 mPa·s5875 mPa·s
Pour point−38 °C−38 °C
Flash point226 °C230 °C
Density0.87 g/cm³0.86 g/cm³
HTHS 150 °Cnot stated
Sulphated ashnot stated

All 10W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SL, CF · JASO MA, MA2
Oils by specification

Similar oils

Oils in the 10W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-40 class.

Mannol Quad 4-Takt Racing 10W-40 is a motorcycle oil from Mannol, viscosity grade 10W-40. In the database we compare it with 31 other oils in the 10W-40 class.

The oil meets API SL, API CF, JASO MA, JASO MA2. JASO MA2 means the oil is also suitable for motorcycles with a wet clutch.

Viscosity at 100 °C is 13.4 mm²/s, near the lower end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thin side, which helps fuel economy.

Average values: pour point −38 °C is close to the class middle (median −38).

Weaker values: viscosity index 150 is among the weakest in the class (median 156); TBN 5.7 mg KOH/g is among the weakest in the class (median 7); CCS 5850 mPa·s is in the weaker half of the class (median 5704); flash point 226 °C is in the weaker half of the class (median 232).

Limit values: CCS 5850 mPa·s at −25 °C is 84 % of the SAE limit (7000 mPa·s).

Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.