Mannol TS-20 10W-30
Mannol TS-20 10W-30 is a 10W-30 engine oil (ACEA E9, E7 · API CJ-4, SN). According to the manufacturer's data sheet it has a viscosity of 72.37 mm²/s at 40 °C, 11.9 mm²/s at 100 °C, a viscosity index of 162, a TBN of 10.09 mg KOH/g and a pour point of −39 °C.
Data sheet ↗ Data verified: 10 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 10W-30 i |
|---|---|---|
| Viscosity 40 °C | 72.37 mm²/s | 77.6 mm²/s |
| Viscosity 100 °C | 11.9 mm²/s | 11.95 mm²/s |
| Viscosity index | 162 | 142.5 |
| TBN | 10.09 mg KOH/g | 9.95 mg KOH/g |
| CCS −25 °C | 4014 mPa·s | 5894 mPa·s |
| Pour point | −39 °C | −39 °C |
| Flash point | 224 °C | 228 °C |
| Density | 0.85 g/cm³ | 0.867 g/cm³ |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA E9 requires at least 3.5 mPa·s. | |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA E9 allows at most 1 %. |
All 10W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA E9, E7 · API CJ-4, SN
- Oils by specification
Similar oils
Oils in the 10W-30 class with the closest parameters and the same specification.
- Lukoil Avantgarde Professional XLA 10W-30ACEA E9 · API CK-4
- Repsol Giant 7630 LS-FE 10W-30ACEA E9, E7 · API CK-4, CJ-4, CI-4
- Shell Rimula R5 LE 10W-30ACEA E9, E7 · API CK-4, CJ-4, CI-4, CH-4
- Castrol Vecton Long Drain 10W-30 E6/E9ACEA E6, E7, E9, E11 · API CJ-4
- Mobil Delvac Modern 10W-30 Full ProtectionACEA E7, E9, E11 · API CK-4, CJ-4, CI-4, CH-4
- Petronas Urania Elite 10W-30ACEA E11, E7 · API CK-4, CJ-4
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.
Mannol TS-20 10W-30 is a motor oil from Mannol, viscosity grade 10W-30. In the database we compare it with 15 other oils in the 10W-30 class.
The oil meets ACEA E9, ACEA E7, API CJ-4, API SN and more (12 in total). ACEA E9 is the European specification for heavy-duty diesel engines with a DPF. ACEA E7 is the European specification for heavy-duty diesel engines without a DPF. API SN is an older American specification for petrol engines.
Viscosity at 100 °C is 11.9 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.
Strengths: viscosity index 162 is among the best 10 % in the class (median 142); TBN 10.1 mg KOH/g is in the top quarter of the class (median 9.9); CCS 4014 mPa·s is among the best 10 % in the class (median 5863).
Average values: pour point −39 °C is close to the class middle (median −39).
Weaker values: flash point 224 °C is in the weaker half of the class (median 231).
Limit values: CCS 4014 mPa·s at −25 °C is 57 % of the SAE limit (7000 mPa·s), giving a large cold-start reserve.
Based on its values it suits higher loads, towing or high-mileage engines and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.