EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol TS-7 UHPD Blue 10W-40

Mannol TS-7 UHPD Blue 10W-40 is a 10W-40 engine oil (ACEA E9, E7, E6, E4 · API CJ-4, CI-4). According to the manufacturer's data sheet it has a viscosity of 83.94 mm²/s at 40 °C, 13.27 mm²/s at 100 °C, a viscosity index of 160, a TBN of 10.2 mg KOH/g and a pour point of −42 °C.

Data sheet ↗ Data verified: 10 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-40 i
Viscosity 40 °C83.94 mm²/s96 mm²/s
Viscosity 100 °C13.27 mm²/s14.4 mm²/s
Viscosity index160 153.5
TBN10.2 mg KOH/g10.585 mg KOH/g
CCS −25 °C5297 mPa·s6450 mPa·s
Pour point−42 °C−39 °C
Flash point224 °C226 °C
Density0.87 g/cm³0.866 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA E9 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA E6 allows at most 1 %.

All 10W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E9, E7, E6, E4 · API CJ-4, CI-4
Oils by specification

Similar oils

Oils in the 10W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-40 class.

Mannol TS-7 UHPD Blue 10W-40 is a motor oil from Mannol, viscosity grade 10W-40. In the database we compare it with 30 other oils in the 10W-40 class.

The oil meets ACEA E9, ACEA E7, ACEA E6, ACEA E4 and more (13 in total). ACEA E9 is the European specification for heavy-duty diesel engines with a DPF. ACEA E7 is the European specification for heavy-duty diesel engines without a DPF. ACEA E6 is the European specification for heavy-duty diesel engines with a DPF and long drain intervals.

Viscosity at 100 °C is 13.27 mm²/s, near the lower end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thin side, which helps fuel economy.

Strengths: viscosity index 160 is among the best 10 % in the class (median 154); CCS 5297 mPa·s is in the top quarter of the class (median 6150); pour point −42 °C is in the top quarter of the class (median −39).

Weaker values: TBN 10.2 mg KOH/g is in the weaker half of the class (median 10.6); flash point 224 °C is in the weaker half of the class (median 230).

Limit values: CCS 5297 mPa·s at −25 °C is 76 % of the SAE limit (7000 mPa·s).

Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.