EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol TS-9 UHPD Nano 10W-40

Mannol TS-9 UHPD Nano 10W-40 is a 10W-40 engine oil (ACEA E7 · API CI-4, SL). According to the manufacturer's data sheet it has a viscosity of 100 mm²/s at 40 °C, 14.2 mm²/s at 100 °C, a viscosity index of 145, a TBN of 10.67 mg KOH/g and a pour point of −42 °C.

Data sheet ↗ Data verified: 10 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-40 i
Viscosity 40 °C100 mm²/s96 mm²/s
Viscosity 100 °C14.2 mm²/s14.4 mm²/s
Viscosity index145 153.5
TBN10.67 mg KOH/g10.585 mg KOH/g
CCS −25 °C7000 mPa·s6450 mPa·s
Pour point−42 °C−39 °C
Flash point226 °C226 °C
Density0.87 g/cm³0.866 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA E7 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA E7 allows at most 2 %.

All 10W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E7 · API CI-4, SL
Oils by specification

Similar oils

Oils in the 10W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-40 class.

Mannol TS-9 UHPD Nano 10W-40 is a motor oil from Mannol, viscosity grade 10W-40. In the database we compare it with 30 other oils in the 10W-40 class.

The oil meets API CI-4, API SL, ACEA E7, Volvo VDS-3 and more (10 in total). ACEA E7 is the European specification for heavy-duty diesel engines without a DPF.

Viscosity at 100 °C is 14.2 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.

Strengths: pour point −42 °C is in the top quarter of the class (median −39).

Average values: TBN 10.7 mg KOH/g is close to the class middle (median 10.6).

Weaker values: viscosity index 145 is among the weakest in the class (median 154); CCS 7000 mPa·s is among the weakest in the class (median 6150); flash point 226 °C is in the weaker half of the class (median 230).

Limit values: CCS 7000 mPa·s at −25 °C is 100 % of the SAE limit (7000 mPa·s), leaving little cold-start reserve.

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.