EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol TS-5 UHPD 10W-40

Mannol TS-5 UHPD 10W-40 is a 10W-40 engine oil (ACEA E7, A3/B4 · API CI-4, CH-4, SL · JASO DH-1). According to the manufacturer's data sheet it has a viscosity of 94.05 mm²/s at 40 °C, 14.23 mm²/s at 100 °C, a viscosity index of 156, a TBN of 10.86 mg KOH/g and a pour point of −45 °C.

Data sheet ↗ Data verified: 10 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-40 i
Viscosity 40 °C94.05 mm²/s96 mm²/s
Viscosity 100 °C14.23 mm²/s14.4 mm²/s
Viscosity index156 153.5
TBN10.86 mg KOH/g10.585 mg KOH/g
CCS −25 °C5266 mPa·s6450 mPa·s
Pour point−45 °C−39 °C
Flash point224 °C226 °C
Density0.87 g/cm³0.866 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA E7 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA A3/B4 allows at most 1.6 %.

All 10W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E7, A3/B4 · API CI-4, CH-4, SL · JASO DH-1
Oils by specification

Similar oils

Oils in the 10W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-40 class.

Mannol TS-5 UHPD 10W-40 is a motor oil from Mannol, viscosity grade 10W-40. In the database we compare it with 30 other oils in the 10W-40 class.

The oil meets API CI-4, API CH-4, API SL, ACEA E7 and more (12 in total). ACEA E7 is the European specification for heavy-duty diesel engines without a DPF. ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s.

Viscosity at 100 °C is 14.23 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.

Strengths: CCS 5266 mPa·s is in the top quarter of the class (median 6150); pour point −45 °C is among the best 10 % in the class (median −39).

Average values: viscosity index 156 is close to the class middle (median 154); TBN 10.9 mg KOH/g is close to the class middle (median 10.6).

Weaker values: flash point 224 °C is in the weaker half of the class (median 230).

Limit values: CCS 5266 mPa·s at −25 °C is 75 % of the SAE limit (7000 mPa·s).

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.