EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Meguin

megol Motorenoel Fuel Economy SAE 5W-30

megol Motorenoel Fuel Economy SAE 5W-30 is a 5W-30 C3 engine oil (ACEA C2, C3 · API SP). According to the manufacturer's data sheet it has a viscosity of 73 mm²/s at 40 °C, 12.4 mm²/s at 100 °C, a viscosity index of 165, a TBN of 8.5 mg KOH/g and a pour point of −39 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 C3 i
Viscosity 40 °C73 mm²/s70 mm²/s
Viscosity 100 °C12.4 mm²/s12 mm²/s
Viscosity index165 168
TBN8.5 mg KOH/g7.4 mg KOH/g
CCS −30 °C6600 mPa·sThe manufacturer gives only a limit, "at most 6600", not a measured value.5881 mPa·s
Pour point−39 °C−42 °C
Flash point230 °C230 °C
Density0.855 g/cm³0.851 g/cm³
HTHS 150 °C3.5 mPa·sThe manufacturer gives only a limit, "at least 3.5", not a measured value.3.5 mPa·s
Sulphated ash0.8 %The manufacturer gives only a limit, "at most 0.8", not a measured value.0.795 %
Noack volatility9.7 %

All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C2, C3 · API SP
Oils by specification

Similar oils

Oils in the 5W-30 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.

megol Motorenoel Fuel Economy SAE 5W-30 is a motor oil from Meguin, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.

The oil meets ACEA C2, ACEA C3, API SP, MB 226.52 and more (7 in total). ACEA C2 is a low-ash oil with reduced HTHS (from 2.9 mPa·s) for DPF engines where the carmaker wants lower friction. ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI).

Viscosity at 100 °C is 12.4 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: TBN 8.5 mg KOH/g is among the best 10 % in the class (median 7.4).

Average values: flash point 230 °C is close to the class middle (median 230).

Weaker values: viscosity index 165 is in the weaker half of the class (median 168); pour point −39 °C is in the weaker half of the class (median −42); Noack volatility 9.7 % is among the weakest in the class (median 9).

Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.