EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Motul

MOTUL 8100 X-clean FE 5W-30

MOTUL 8100 X-clean FE 5W-30 is a 5W-30 C3 engine oil (ACEA C2, C3 · API SQ). According to the manufacturer's data sheet it has a viscosity of 72.6 mm²/s at 40 °C, 12.2 mm²/s at 100 °C, a viscosity index of 165, HTHS of 3.5 mPa·s, a TBN of 8.1 mg KOH/g, a pour point of −42 °C and sulphated ash of 0.71 %.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 C3 i
Viscosity 40 °C72.6 mm²/s70 mm²/s
Viscosity 100 °C12.2 mm²/s12 mm²/s
Viscosity index165 168
TBN8.1 mg KOH/g7.4 mg KOH/g
CCS −30 °Cnot stated
Pour point−42 °C−42 °C
Flash point228 °C230 °C
Density0.849 g/cm³Density is given at 20 °C (most manufacturers state it at 15 °C).0.851 g/cm³
HTHS 150 °C3.5 mPa·s3.5 mPa·s
Sulphated ash0.71 %0.795 %

All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C2, C3 · API SQ
Oils by specification

Similar oils

Oils in the 5W-30 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.

MOTUL 8100 X-clean FE 5W-30 is a motor oil from Motul, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.

The oil meets ACEA C2, ACEA C3, API SQ, MB 229.52 and more (8 in total). ACEA C2 is a low-ash oil with reduced HTHS (from 2.9 mPa·s) for DPF engines where the carmaker wants lower friction. ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. API SQ is the latest American specification for petrol engines, introduced in 2025.

Viscosity at 100 °C is 12.2 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: TBN 8.1 mg KOH/g is in the top quarter of the class (median 7.4).

Average values: pour point −42 °C is close to the class middle (median −42); flash point 228 °C is close to the class middle (median 230).

Weaker values: viscosity index 165 is in the weaker half of the class (median 168); HTHS 3.5 mPa·s is in the weaker half of the class (median 3.5).

Limit values: HTHS 3.5 mPa·s meets the 3.5 mPa·s minimum required for this class; sulphated ash of 0.71 % is suitable for engines with a DPF.

Based on its values it suits engines with a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility, so we cannot compare it on this parameter.