EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Motul

Motul Specific 504 00 507 00 5W-30

Motul Specific 504 00 507 00 5W-30 is a 5W-30 C3 engine oil (ACEA C3). According to the manufacturer's data sheet it has a viscosity of 68 mm²/s at 40 °C, 12 mm²/s at 100 °C, a viscosity index of 171, HTHS of 4 mPa·s, a TBN of 7 mg KOH/g, a pour point of −39 °C and sulphated ash of 0.68 %.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 C3 i
Viscosity 40 °C68 mm²/s70 mm²/s
Viscosity 100 °C12 mm²/s12 mm²/s
Viscosity index171 168
TBN7 mg KOH/g7.4 mg KOH/g
CCS −30 °Cnot stated
Pour point−39 °C−42 °C
Flash point226 °C230 °C
Density0.848 g/cm³Density is given at 20 °C (most manufacturers state it at 15 °C).0.851 g/cm³
HTHS 150 °C4 mPa·s3.5 mPa·s
Sulphated ash0.68 %0.795 %

All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C3
Oils by specification

Similar oils

Oils in the 5W-30 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.

Motul Specific 504 00 507 00 5W-30 is a motor oil from Motul, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.

The oil meets ACEA C3, VW 504 00, VW 507 00. ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. VW 504 00 / 507 00 are VW Group approvals for engines with extended LongLife service intervals.

Viscosity at 100 °C is 12 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: HTHS 4 mPa·s is among the best 10 % in the class (median 3.5).

Average values: viscosity index 171 is close to the class middle (median 168); flash point 226 °C is close to the class middle (median 230).

Weaker values: TBN 7 mg KOH/g is in the weaker half of the class (median 7.4); pour point −39 °C is in the weaker half of the class (median −42).

Limit values: HTHS 4 mPa·s meets the 3.5 mPa·s minimum required for this class; sulphated ash of 0.68 % is suitable for engines with a DPF.

Based on its values it suits engines with a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility, so we cannot compare it on this parameter.