Oil volatility (Noack): what it means and why it matters
The Noack test shows what percentage of the oil evaporates at high temperature. The lower the number, the less oil the engine uses and the longer the oil keeps its viscosity.
How Noack is measured
An oil sample is heated to 250 °C for one hour while air flows over it. Afterwards the loss of oil is weighed. The result is stated in mass percent, for example 9.5 %. The methods are CEC-L-40-A-93 or ASTM D5800, and their results are comparable.
German data sheets call the value Verdampfungsverlust nach Noack, English ones Noack volatility or evaporation loss.
Why it matters
The light fractions of the oil evaporate in a hot engine. The engine then uses oil and the remaining oil thickens. The vapours end up in the intake and can foul valves, the turbo and the particulate filter.
Low volatility matters most for thin 0W-20 and 0W-16 oils, turbo engines and long drain intervals.
Which values are good
Specifications only set an upper limit: ACEA C3, ACEA A3/B4 and other ACEA classes allow at most 13 %, API petrol specifications at most 15 %. Good synthetic oils usually have 6 to 10 %, ester-based oils even less.
You will find the Noack value for oils whose maker states it in the data sheet – as the Noack column in the class table and on the oil page. Lower is better.