ADDINOL Pole Position 10W-50
ADDINOL Pole Position 10W-50 is a 10W-50 engine oil (JASO MA2 · API SN). According to the manufacturer's data sheet it has 18.9 mm²/s at 100 °C, a viscosity index of 166, HTHS of 4.7 mPa·s and a TBN of 7.5 mg KOH/g.
Data sheet ↗ Data verified: 8 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 10W-50 i |
|---|---|---|
| Viscosity 40 °C | not stated | |
| Viscosity 100 °C | 18.9 mm²/s | 18 mm²/s |
| Viscosity index | 166 | 166 |
| TBN | 7.5 mg KOH/g | 7.5 mg KOH/g |
| CCS −25 °C | not stated | |
| Pour point | −40 °CThe manufacturer gives only a limit, "at most −40", not a measured value. | −33 °C |
| Flash point | 244 °CThe manufacturer gives only a limit, "at least 244", not a measured value. | 230 °C |
| Density | 0.853 g/cm³ | 0.856 g/cm³ |
| HTHS 150 °C | 4.7 mPa·s | 4.7 mPa·s |
| Sulphated ash | not stated |
All 10W-50 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
Similar oils
Oils in the 10W-50 class with the closest parameters and the same specification.
- Motul 7100 4T 10W-50JASO MA2 · API SP
- Liqui Moly Motorbike 4T Synth 10W-50 Street RaceAPI SP · JASO MA2
- Motul 300V 4T Factory Line Off Road 10W-50JASO MA2
- Silkolene Pro 4 XP 10W-50JASO MA2 · API SN
- Repsol Moto Racing 4T 10W-50JASO MA2 · API SN
- Motul 5100 4T 10W-50JASO MA2 · API SM, SL, SJ, SH, SG
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 10W-50 class.
ADDINOL Pole Position 10W-50 is a motorcycle oil from Addinol, viscosity grade 10W-50. In the database we compare it with 8 other oils in the 10W-50 class.
The oil meets JASO MA2, JASO MA, API SN. JASO MA2 means the oil is also suitable for motorcycles with a wet clutch. API SN is an older American specification for petrol engines.
Viscosity at 100 °C is 18.9 mm²/s, in the middle of the 16.3–21.9 mm²/s range for the summer grade 50.
Average values: viscosity index 166 is close to the class middle (median 166); TBN 7.5 mg KOH/g is close to the class middle (median 7.5).
Limit values: HTHS 4.7 mPa·s meets the 3.7 mPa·s minimum required for this class.
The data sheet does not state Noack volatility and sulphated ash, so we cannot compare it on these parameters.