ENEOS X PRIME 0W-16
ENEOS X PRIME 0W-16 is a 0W-16 engine oil (API SP/RC · ILSAC GF-6B). According to the manufacturer's data sheet it has a viscosity of 26.1 mm²/s at 40 °C, 6.4 mm²/s at 100 °C, a viscosity index of 215 and a pour point of −52.5 °C.
Data sheet ↗ Data verified: 8 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-16 i |
|---|---|---|
| Viscosity 40 °C | 26.1 mm²/s | 37 mm²/s |
| Viscosity 100 °C | 6.4 mm²/s | 7.235 mm²/s |
| Viscosity index | 215 | 162 |
| TBN | 4.9 mg KOH/gTBN is measured by ASTM D664, which gives lower figures than the more common ASTM D2896, so do not compare it directly with other oils. | 7.5 mg KOH/g |
| CCS −35 °C | not stated | |
| Pour point | −52.5 °C | −45 °C |
| Flash point | 228 °C | 224 °C |
| Density | 0.841 g/cm³ | 0.844 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated |
All 0W-16 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SP/RC · ILSAC GF-6B
- Oils by specification
Similar oils
Oils in the 0W-16 class with the closest parameters and the same specification.
- Idemitsu IFG7 0W-16API SP · ILSAC GF-6B
- Hengst 0W-16 ProAPI SP · ILSAC GF-6B
- TotalEnergies Quartz 9000 Xtra Future XT 0W-16API SQ · ILSAC GF-7B
- Opet Fuchs Fulltech 0W-16API SP / SN Plus · ILSAC GF-6B
- ENEOS 0W-16API SQ · ILSAC GF-7B
- PETRONAS Syntium 7000 Hybrid 0W-16API SP · ILSAC GF-6B
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-16 class.
ENEOS X PRIME 0W-16 is a motor oil from ENEOS, viscosity grade 0W-16. In the database we compare it with 19 other oils in the 0W-16 class.
The oil meets API SP, ILSAC GF-6B. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI).
Viscosity at 100 °C is 6.4 mm²/s, near the lower end of the 6.1–8.2 mm²/s range for the summer grade 16. Within its class the oil is on the thin side, which helps fuel economy.
Strengths: viscosity index 215 is among the best 10 % in the class (median 162); pour point −52.5 °C is in the top quarter of the class (median −45).
Average values: flash point 228 °C is close to the class middle (median 224).
Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.