Mannol Diesel 15W-40
Mannol Diesel 15W-40 is a 15W-40 engine oil (ACEA E3, A3/B3 · API CG-4, SL). According to the manufacturer's data sheet it has a viscosity of 109 mm²/s at 40 °C, 14.4 mm²/s at 100 °C, a viscosity index of 135, a TBN of 8.4 mg KOH/g and a pour point of −33 °C.
Data sheet ↗ Data verified: 10 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 15W-40 i |
|---|---|---|
| Viscosity 40 °C | 109 mm²/s | 107 mm²/s |
| Viscosity 100 °C | 14.4 mm²/s | 14.5 mm²/s |
| Viscosity index | 135 | 138.5 |
| TBN | 8.4 mg KOH/g | 9.91 mg KOH/g |
| CCS −20 °C | 6805 mPa·s | 6560 mPa·s |
| Pour point | −33 °C | −35 °C |
| Flash point | 224 °C | 230 °C |
| Density | 0.89 g/cm³ | 0.875 g/cm³ |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA A3/B3 requires at least 3.5 mPa·s. | |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA A3/B3 allows at most 1.5 %. |
All 15W-40 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
Similar oils
Oils in the 15W-40 class with the closest parameters and the same specification.
- Mannol TS-1 SHPD 15W-40ACEA E3, A3/B4 · API CH-4, SL
- Ravenol Formel Diesel Super 15W-40ACEA E2, B4 · API CF-4
- Eni i-Sigma performance E7 15W-40ACEA E7, E5, E3 · API CI-4, CH-4
- Repsol Diesel Super Turbo SHPD 15W-40ACEA E5 · API CH-4, CG-4, CF-4
- Q8 T 750 15W-40ACEA E7 · API CI-4, CF
- Mannol TS-4 SHPD 15W-40ACEA E7, A3/B4 · API CI-4, CH-4, SL · JASO DH-1
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.
Mannol Diesel 15W-40 is a motor oil from Mannol, viscosity grade 15W-40. In the database we compare it with 25 other oils in the 15W-40 class.
The oil meets API CG-4, API SL, ACEA E3, ACEA A3/B3 and more (11 in total). ACEA A3/B3 is for petrol and diesel engines without a DPF with extended drain intervals.
Viscosity at 100 °C is 14.4 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.
Weaker values: viscosity index 135 is among the weakest in the class (median 139); TBN 8.4 mg KOH/g is among the weakest in the class (median 9.8); CCS 6805 mPa·s is among the weakest in the class (median 6250); pour point −33 °C is in the weaker half of the class (median −36); flash point 224 °C is among the weakest in the class (median 230).
Limit values: CCS 6805 mPa·s at −20 °C is 97 % of the SAE limit (7000 mPa·s), leaving little cold-start reserve.
The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.