EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol TS-1 SHPD 15W-40

Mannol TS-1 SHPD 15W-40 is a 15W-40 engine oil (ACEA E3, A3/B4 · API CH-4, SL). According to the manufacturer's data sheet it has a viscosity of 108.47 mm²/s at 40 °C, 14.65 mm²/s at 100 °C, a viscosity index of 139, a TBN of 8.2 mg KOH/g and a pour point of −33 °C.

Data sheet ↗ Data verified: 10 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 15W-40 i
Viscosity 40 °C108.47 mm²/s107 mm²/s
Viscosity 100 °C14.65 mm²/s14.5 mm²/s
Viscosity index139 138.5
TBN8.2 mg KOH/g9.91 mg KOH/g
CCS −20 °C6250 mPa·s6560 mPa·s
Pour point−33 °C−35 °C
Flash point230 °C230 °C
Density0.89 g/cm³0.875 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA A3/B4 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA A3/B4 allows at most 1.6 %.

All 15W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E3, A3/B4 · API CH-4, SL
Oils by specification

Similar oils

Oils in the 15W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.

Mannol TS-1 SHPD 15W-40 is a motor oil from Mannol, viscosity grade 15W-40. In the database we compare it with 25 other oils in the 15W-40 class.

The oil meets API CH-4, API SL, ACEA E3, ACEA A3/B4 and more (9 in total). ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s.

Viscosity at 100 °C is 14.65 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.

Average values: viscosity index 139 is close to the class middle (median 139); CCS 6250 mPa·s is close to the class middle (median 6250); flash point 230 °C is close to the class middle (median 230).

Weaker values: TBN 8.2 mg KOH/g is among the weakest in the class (median 9.8); pour point −33 °C is in the weaker half of the class (median −36).

Limit values: CCS 6250 mPa·s at −20 °C is 89 % of the SAE limit (7000 mPa·s).

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.