EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Motul

Motul Specific 508 00 509 00 0W-20

Motul Specific 508 00 509 00 0W-20 is a 0W-20 engine oil (ACEA C5, C6 · API SP). According to the manufacturer's data sheet it has a viscosity of 42.4 mm²/s at 40 °C, 8.1 mm²/s at 100 °C, a viscosity index of 168, HTHS of 2.6 mPa·s, a TBN of 9.6 mg KOH/g, a pour point of −45 °C and sulphated ash of 0.78 %.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-20 i
Viscosity 40 °C42.4 mm²/s43 mm²/s
Viscosity 100 °C8.1 mm²/s8.2 mm²/s
Viscosity index168 173.5
TBN9.6 mg KOH/g8.2 mg KOH/g
CCS −35 °Cnot stated
Pour point−45 °C−48 °C
Flash point226 °C226 °C
Density0.838 g/cm³Density is given at 20 °C (most manufacturers state it at 15 °C).0.842 g/cm³
HTHS 150 °C2.6 mPa·s2.6 mPa·s
Sulphated ash0.78 %0.8 %

All 0W-20 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C5, C6 · API SP
Oils by specification

Similar oils

Oils in the 0W-20 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.

Motul Specific 508 00 509 00 0W-20 is a motor oil from Motul, viscosity grade 0W-20. In the database we compare it with 38 other oils in the 0W-20 class.

The oil meets ACEA C5, ACEA C6, API SP, VW 508 00 and more (7 in total). ACEA C5 is a fuel-economy specification with low HTHS (2.6–2.9 mPa·s) for newer DPF engines. ACEA C6 is a fuel-economy specification with low HTHS and LSPI protection for modern engines with a particulate filter. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). VW 508 00 / 509 00 are VW approvals for newer engines using 0W-20 oils. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.

Viscosity at 100 °C is 8.1 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.

Strengths: TBN 9.6 mg KOH/g is among the best 10 % in the class (median 8.2).

Average values: flash point 226 °C is close to the class middle (median 228).

Weaker values: viscosity index 168 is in the weaker half of the class (median 174); HTHS 2.6 mPa·s is among the weakest in the class (median 2.7); pour point −45 °C is in the weaker half of the class (median −48).

Limit values: HTHS 2.6 mPa·s meets the 2.6 mPa·s minimum required for this class; sulphated ash of 0.78 % is suitable for engines with a DPF.

Based on its values it suits engines with a DPF. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility, so we cannot compare it on this parameter.