Performance Plus Full Synthetic dexos1 Gen3 5W-20
Performance Plus Full Synthetic dexos1 Gen3 5W-20 is a 5W-20 engine oil (API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 45.8 mm²/s at 40 °C, 8.3 mm²/s at 100 °C, a viscosity index of 158, a pour point of −39 °C and sulphated ash of 0.8 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-20 i |
|---|---|---|
| Viscosity 40 °C | 45.8 mm²/s | 47.75 mm²/s |
| Viscosity 100 °C | 8.3 mm²/s | 8.4 mm²/s |
| Viscosity index | 158 | 157.5 |
| TBN | not stated | |
| CCS −30 °C | 3700 mPa·s | 4397 mPa·s |
| Pour point | −39 °C | −42 °C |
| Flash point | 226 °C | 225 °C |
| Density | 0.847 g/cm³ | 0.85 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | 0.8 % | 0.815 % |
All 5W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SP · ILSAC GF-6A
- Oils by specification
Similar oils
Oils in the 5W-20 class with the closest parameters and the same specification.
- Ford Motorcraft 5W-20 Synthetic BlendAPI SQ · ILSAC GF-7A
- Castrol GTX High Mileage 5W-20API SQ · ILSAC GF-7
- Castrol EDGE 5W-20 (US)API SQ · ILSAC GF-7
- Pennzoil Platinum 5W-20API SN · ILSAC GF-5
- Castrol EDGE High Mileage 5W-20API SQ · ILSAC GF-7
- Castrol GTX Ultraclean 5W-20API SQ · ILSAC GF-7
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-20 class.
Performance Plus Full Synthetic dexos1 Gen3 5W-20 is a motor oil from Performance Plus, viscosity grade 5W-20. In the database we compare it with 22 other oils in the 5W-20 class.
The oil meets API SP, ILSAC GF-6A, Ford WSS-M2C945-B1, Chrysler MS-6395. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 8.3 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.
Strengths: CCS 3700 mPa·s is among the best 10 % in the class (median 4322).
Average values: viscosity index 158 is close to the class middle (median 158).
Weaker values: pour point −39 °C is in the weaker half of the class (median −42); flash point 226 °C is in the weaker half of the class (median 228).
Limit values: CCS 3700 mPa·s at −30 °C is 56 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve; sulphated ash of 0.8 % is suitable for engines with a DPF.
Based on its values it suits engines with a DPF and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, TBN and Noack volatility, so we cannot compare it on these parameters.