EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
American oils (USA) · classic V8s and older engines with wider clearances

American motor oil parameters 20W-50

Lab values from technical data sheets in one place. Click a column header to sort, tick up to four oils to compare, even across classes.

Data compiled from manufacturers' technical data sheets, 19 Nov 2026

10oils in class
16.3–21.9viscosity 100 °C, mm²/s
≤ 9500CCS at −15 °C, mPa·s
≥ 3.7HTHS, mPa·s
≈ −15 °Ccold start down to about

Sulphated ash and HTHS: if the manufacturer does not state them, the limit of the oil’s specification applies. ACEA C2, C3, C5 and C6 allow at most 0.8 % ash, C4 at most 0.5 %, E6, E8 and E11 at most 1.0 %, A3/B4, E4 and E7 higher values. HTHS must be at least 3.5 mPa·s for C3, C4, A3/B4 and the heavy-duty E specifications, at least 2.9 for C2, and from 2.6 to less than 2.9 mPa·s for C5 and C6.

Showing 10 of 10
Valvoline Advanced Full Synthetic 20W-50ValvolineACEA A3/B3A3/B4API SPData sheet ↗
169
20.9
145
not stated
8500i
−24i
not stated
0.867
5.4
not statednot stated
Valvoline VR1 Racing 20W-50ValvolineData sheet ↗
187
20
124
8.3
8900i
−24i
not stated
0.886
not stated
1.1i
not stated
Royal Purple HPS 20W-50Royal PurpleData sheet ↗
122.2
18.06
164
9.6
5027
−45
224
not stated
5.2
not statednot stated
Pennzoil 20W-50PennzoilAPI SNData sheet ↗
161.4
17.5
120
not stated
7500
−33
214i
0.88
not statednot statednot stated
AMSOIL OE 20W-50AmsoilAPI SN PLUSData sheet ↗
142.5
19.8
159
8
3924
−35
248
not stated
5.4
not stated
3.6
Red Line 20W-50Red LineACEA A3/B3API SNData sheet ↗
148
19.8
155
not stated
5000i
−45
234
not stated
6.1
not stated
6
PennGrade 1 High Performance 20W-50PennGradeData sheet ↗
159
20
140
10.6
not stated
−27i
216
0.88
6.2
1.2
not stated
Schaeffer Micron Moly Racing Oil 20W-50SchaefferAPI SMData sheet ↗
162.1
not statedi
125
7.5
3466
−36
230
not stated
4.47
0.9
12.2
Schaeffer Supreme 7000 Synthetic Plus Racing Oil 20W-50SchaefferAPI SMData sheet ↗not statednot statedi
140
7.5
3506
−42i
204.6
not stated
5.31
0.9
7.5
Castrol GTX 20W-50CastrolAPI SNData sheet ↗
159
18.1
125
not stated
7700
not statednot stated
0.88
not statednot statednot stated
V40 · mm²/s
187
V100 · mm²/s
20
VI
124
TBN · mg KOH/g
8.3
CCS · mPa·s
8900
Pour pt. · °C
−24
Flash · °C
—
Density · g/cm³
0.886
HTHS · mPa·s
—
Ash · %
1.1
Noack · %
—
V40 · mm²/s
122.2
V100 · mm²/s
18.06
VI
164
TBN · mg KOH/g
9.6
CCS · mPa·s
5027
Pour pt. · °C
−45
Flash · °C
224
Density · g/cm³
—
HTHS · mPa·s
5.2
Ash · %
—
Noack · %
—
V40 · mm²/s
161.4
V100 · mm²/s
17.5
VI
120
TBN · mg KOH/g
—
CCS · mPa·s
7500
Pour pt. · °C
−33
Flash · °C
214
Density · g/cm³
0.88
HTHS · mPa·s
—
Ash · %
—
Noack · %
—
V40 · mm²/s
142.5
V100 · mm²/s
19.8
VI
159
TBN · mg KOH/g
8
CCS · mPa·s
3924
Pour pt. · °C
−35
Flash · °C
248
Density · g/cm³
—
HTHS · mPa·s
5.4
Ash · %
—
Noack · %
3.6
Red Line 20W-50Red LineACEA A3/B3API SNData sheet ↗
V40 · mm²/s
148
V100 · mm²/s
19.8
VI
155
TBN · mg KOH/g
—
CCS · mPa·s
5000
Pour pt. · °C
−45
Flash · °C
234
Density · g/cm³
—
HTHS · mPa·s
6.1
Ash · %
—
Noack · %
6
Castrol GTX 20W-50CastrolAPI SNData sheet ↗
V40 · mm²/s
159
V100 · mm²/s
18.1
VI
125
TBN · mg KOH/g
—
CCS · mPa·s
7700
Pour pt. · °C
—
Flash · °C
—
Density · g/cm³
0.88
HTHS · mPa·s
—
Ash · %
—
Noack · %
—
Glossary

What the parameters mean

Viscosity at 40 °C and 100 °C
Kinematic viscosity in mm²/s. The 100 °C value sets the summer grade: 30 starts at 9.3, 40 at 12.5 and 50 at 16.3 mm²/s.
Viscosity index
How little the viscosity changes with temperature. A higher index means a more stable oil.
TBN
Total base number in mg KOH/g. A reserve for neutralising acids; higher helps with long drain intervals. C3 oils deliberately have a lower TBN because of the DPF filter.
CCS
Apparent viscosity at cold start in mPa·s. The limit is 6200 at −35 °C for 0W, 6600 at −30 °C for 5W and 7000 at −25 °C for 10W. Lower means easier starting.
Pour point
The lowest temperature at which the oil still flows. Lower is better.
Flash point (COC)
The temperature at which vapours ignite, measured in an open cup. Higher usually means lower volatility.
Density
In g/cm³, usually given by manufacturers at 15 °C. Used for checking, not for rating.
HTHS
Viscosity at 150 °C and high shear in mPa·s. Shows bearing protection under load. ACEA A3/B4 and C3 require at least 3.5.
Sulphated ash
Ash content in % by weight. For engines with a DPF filter a low number matters; C3 allows at most 0.8 %.
Noack volatility
How many percent of the oil evaporates per hour at 250 °C. Lower means less oil consumption.
Did you know

The same oil, another name

These oils have identical laboratory values. Most likely it is the same oil sold under several names.

  • We found no oils with identical values in this class.
Chart

Class oils on a chart

Each dot is one oil from the current selection. Click a dot to open the oil's page. Oils without a value for the chosen parameter are not shown.

5.25.45.65.866.218192021Viscosity 100 °C (mm²/s)HTHS 150 °C (mPa·s)Valvoline Advanced Full Synthetic 20W-50 – Viscosity 100 °C: 20.9, HTHS 150 °C: 5.4Royal Purple HPS 20W-50 – Viscosity 100 °C: 18.06, HTHS 150 °C: 5.2AMSOIL OE 20W-50 – Viscosity 100 °C: 19.8, HTHS 150 °C: 5.4Red Line 20W-50 – Viscosity 100 °C: 19.8, HTHS 150 °C: 6.1PennGrade 1 High Performance 20W-50 – Viscosity 100 °C: 20, HTHS 150 °C: 6.2