- V40 · mm²/s
- 123
- V100 · mm²/s
- 19.3
- VI
- 178
- TBN · mg KOH/g
- 11.8
- CCS · mPa·s
- 6600
- Pour pt. · °C
- −39
- Flash · °C
- 228
- Density · g/cm³
- 0.853
- HTHS · mPa·s
- —
- Ash · %
- —
- Noack · %
- —
American motor oil parameters 5W-50
Lab values from technical data sheets in one place. Click a column header to sort, tick up to four oils to compare, even across classes.
Data compiled from manufacturers' technical data sheets, 19 Nov 2026
Sulphated ash and HTHS: if the manufacturer does not state them, the limit of the oil’s specification applies. ACEA C2, C3, C5 and C6 allow at most 0.8 % ash, C4 at most 0.5 %, E6, E8 and E11 at most 1.0 %, A3/B4, E4 and E7 higher values. HTHS must be at least 3.5 mPa·s for C3, C4, A3/B4 and the heavy-duty E specifications, at least 2.9 for C2, and from 2.6 to less than 2.9 mPa·s for C5 and C6.
| Select | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Valvoline VR1 Racing 5W-50ValvolineACEA A3/B4API SLApprovals: Ford WSS-M2C-153E, GM 6094MData sheet ↗ | 123 | 19.3 | 178 | 11.8 | 6600i | −39 | 228 | 0.853 | not stated | not stated | not stated | |
| Amsoil Signature Series 5W-50AmsoilAPI SQSPSN PlusApprovals: suitable for: API SQ, SP, SN Plus; Ford WSS-M2C931-C, WSS-M2C931-E1; GM dexosRData sheet ↗ | 120 | 19.4 | 182 | 10.4 | 4354 | −48 | 230 | not stated | 4.5 | not stated | not stated | |
| Motorcraft 5W-50 Full SyntheticFordAPI SNData sheet ↗ | 136 | 21 | 181 | not stated | 5900 | −42i | 229 | 0.865 | not stated | not stated | not stated | |
| Red Line 5W-50Red LineACEA A3/B3A3/B4API SNData sheet ↗ | 130 | 21 | 186 | not stated | 6000i | −45 | not stated | not stated | 5 | not stated | 6 | |
| Lucas Synthetic 5W-50Lucas OilAPI SPData sheet ↗ | 127.1 | 18 | 179 | 7 | 6600i | not stated | 218 | 0.892 | not stated | not stated | not stated | |
| Castrol EDGE Supercar 5W-50CastrolAPI SNData sheet ↗ | 102 | 16.7 | 177 | not stated | 5800 | −39 | 220i | 0.853 | not stated | 0.78 | not stated | |
| AMALIE Elixir Full Synthetic 5W-50AMALIEAPI SPData sheet ↗ | 109 | 17.5 | 177 | not stated | 6000 | −36 | 224 | 0.853 | 3.9 | not stated | not stated |
- V40 · mm²/s
- 120
- V100 · mm²/s
- 19.4
- VI
- 182
- TBN · mg KOH/g
- 10.4
- CCS · mPa·s
- 4354
- Pour pt. · °C
- −48
- Flash · °C
- 230
- Density · g/cm³
- —
- HTHS · mPa·s
- 4.5
- Ash · %
- —
- Noack · %
- —
- V40 · mm²/s
- 136
- V100 · mm²/s
- 21
- VI
- 181
- TBN · mg KOH/g
- —
- CCS · mPa·s
- 5900
- Pour pt. · °C
- −42
- Flash · °C
- 229
- Density · g/cm³
- 0.865
- HTHS · mPa·s
- —
- Ash · %
- —
- Noack · %
- —
- V40 · mm²/s
- 130
- V100 · mm²/s
- 21
- VI
- 186
- TBN · mg KOH/g
- —
- CCS · mPa·s
- 6000
- Pour pt. · °C
- −45
- Flash · °C
- —
- Density · g/cm³
- —
- HTHS · mPa·s
- 5
- Ash · %
- —
- Noack · %
- 6
- V40 · mm²/s
- 127.1
- V100 · mm²/s
- 18
- VI
- 179
- TBN · mg KOH/g
- 7
- CCS · mPa·s
- 6600
- Pour pt. · °C
- —
- Flash · °C
- 218
- Density · g/cm³
- 0.892
- HTHS · mPa·s
- —
- Ash · %
- —
- Noack · %
- —
- V40 · mm²/s
- 102
- V100 · mm²/s
- 16.7
- VI
- 177
- TBN · mg KOH/g
- —
- CCS · mPa·s
- 5800
- Pour pt. · °C
- −39
- Flash · °C
- 220
- Density · g/cm³
- 0.853
- HTHS · mPa·s
- —
- Ash · %
- 0.78
- Noack · %
- —
- V40 · mm²/s
- 109
- V100 · mm²/s
- 17.5
- VI
- 177
- TBN · mg KOH/g
- —
- CCS · mPa·s
- 6000
- Pour pt. · °C
- −36
- Flash · °C
- 224
- Density · g/cm³
- 0.853
- HTHS · mPa·s
- 3.9
- Ash · %
- —
- Noack · %
- —
What the parameters mean
- Viscosity at 40 °C and 100 °C
- Kinematic viscosity in mm²/s. The 100 °C value sets the summer grade: 30 starts at 9.3, 40 at 12.5 and 50 at 16.3 mm²/s.
- Viscosity index
- How little the viscosity changes with temperature. A higher index means a more stable oil.
- TBN
- Total base number in mg KOH/g. A reserve for neutralising acids; higher helps with long drain intervals. C3 oils deliberately have a lower TBN because of the DPF filter.
- CCS
- Apparent viscosity at cold start in mPa·s. The limit is 6200 at −35 °C for 0W, 6600 at −30 °C for 5W and 7000 at −25 °C for 10W. Lower means easier starting.
- Pour point
- The lowest temperature at which the oil still flows. Lower is better.
- Flash point (COC)
- The temperature at which vapours ignite, measured in an open cup. Higher usually means lower volatility.
- Density
- In g/cm³, usually given by manufacturers at 15 °C. Used for checking, not for rating.
- HTHS
- Viscosity at 150 °C and high shear in mPa·s. Shows bearing protection under load. ACEA A3/B4 and C3 require at least 3.5.
- Sulphated ash
- Ash content in % by weight. For engines with a DPF filter a low number matters; C3 allows at most 0.8 %.
- Noack volatility
- How many percent of the oil evaporates per hour at 250 °C. Lower means less oil consumption.
The same oil, another name
These oils have identical laboratory values. Most likely it is the same oil sold under several names.
- We found no oils with identical values in this class.
Class oils on a chart
Each dot is one oil from the current selection. Click a dot to open the oil's page. Oils without a value for the chosen parameter are not shown.