EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
American oils (USA) · newer Toyota, Honda and hybrids · ILSAC GF-6B

American motor oil parameters 0W-16

Lab values from technical data sheets in one place. Click a column header to sort, tick up to four oils to compare, even across classes.

Data compiled from manufacturers' technical data sheets, 19 Nov 2026

8oils in class
6.1–8.2viscosity 100 °C, mm²/s
≤ 6200CCS at −35 °C, mPa·s
≥ 2.3HTHS, mPa·s
≈ −35 °Ccold start down to about
Fuel-saving oil with low HTHS. Use it only in engines for which the car maker specifically prescribes it. Older engines and engines without this specification need an oil with HTHS of at least 3.5.

Sulphated ash and HTHS: if the manufacturer does not state them, the limit of the oil’s specification applies. ACEA C2, C3, C5 and C6 allow at most 0.8 % ash, C4 at most 0.5 %, E6, E8 and E11 at most 1.0 %, A3/B4, E4 and E7 higher values. HTHS must be at least 3.5 mPa·s for C3, C4, A3/B4 and the heavy-duty E specifications, at least 2.9 for C2, and from 2.6 to less than 2.9 mPa·s for C5 and C6.

Showing 8 of 8
Valvoline Advanced Full Synthetic 0W-16ValvolineAPI SPSN PlusRCILSAC GF-6BData sheet ↗
34
6.8
163
not stated
6000i
−39i
not stated
0.844
2.4
not stated
15i
Amsoil Signature Series 0W-16AmsoilAPI SQSPSN PlusILSAC GF-7BGF-6BApprovals: suitable for: API SQ, SP, SN Plus; ILSAC GF-7B, GF-6BData sheet ↗
41.5
7.8
161
10.4
3897
−53
220
not stated
2.4
not statednot stated
Pennzoil Platinum 0W-16PennzoilAPI SPILSAC GF-6BData sheet ↗
35.6
7.1
166
not stated
4000
−51
204i
0.834
not statednot statednot stated
Castrol EDGE 0W-16 (US)CastrolAPI SPILSAC GF-6BData sheet ↗
39
7.4
159
not stated
5700
−42
208i
0.848
not stated
0.9
not stated
Schaeffer Supreme 9000 Full Synthetic 0W-16SchaefferAPI SPILSAC GF-6BData sheet ↗not statednot statedi
177
5.3
4235
−38.8
213.9
not stated
2.41
0.9
11.5
Havoline ProDS Full Synthetic 0W-16TexacoAPI SNData sheet ↗
42
7.9
161
not stated
5600i
−36
not stated
0.85
not statednot stated
12
AMSOIL OE 0W-16AmsoilAPI SN PLUSData sheet ↗
36.5
7.2
164
8
4781
−48
218
not stated
2.38
not stated
12.4
AMALIE Elixir Full Synthetic 0W-16AMALIEAPI SQILSAC GF-7BData sheet ↗
37
7.3
168
8
5350
−45
210
not stated
2.4
not stated
12
Amsoil Signature Series 0W-16AmsoilAPI SQSPSN PlusILSAC GF-7BGF-6BApprovals: suitable for: API SQ, SP, SN Plus; ILSAC GF-7B, GF-6BData sheet ↗
V40 · mm²/s
41.5
V100 · mm²/s
7.8
VI
161
TBN · mg KOH/g
10.4
CCS · mPa·s
3897
Pour pt. · °C
−53
Flash · °C
220
Density · g/cm³
—
HTHS · mPa·s
2.4
Ash · %
—
Noack · %
—
Pennzoil Platinum 0W-16PennzoilAPI SPILSAC GF-6BData sheet ↗
V40 · mm²/s
35.6
V100 · mm²/s
7.1
VI
166
TBN · mg KOH/g
—
CCS · mPa·s
4000
Pour pt. · °C
−51
Flash · °C
204
Density · g/cm³
0.834
HTHS · mPa·s
—
Ash · %
—
Noack · %
—
V40 · mm²/s
39
V100 · mm²/s
7.4
VI
159
TBN · mg KOH/g
—
CCS · mPa·s
5700
Pour pt. · °C
−42
Flash · °C
208
Density · g/cm³
0.848
HTHS · mPa·s
—
Ash · %
0.9
Noack · %
—
V40 · mm²/s
36.5
V100 · mm²/s
7.2
VI
164
TBN · mg KOH/g
8
CCS · mPa·s
4781
Pour pt. · °C
−48
Flash · °C
218
Density · g/cm³
—
HTHS · mPa·s
2.38
Ash · %
—
Noack · %
12.4
Glossary

What the parameters mean

Viscosity at 40 °C and 100 °C
Kinematic viscosity in mm²/s. The 100 °C value sets the summer grade: 30 starts at 9.3, 40 at 12.5 and 50 at 16.3 mm²/s.
Viscosity index
How little the viscosity changes with temperature. A higher index means a more stable oil.
TBN
Total base number in mg KOH/g. A reserve for neutralising acids; higher helps with long drain intervals. C3 oils deliberately have a lower TBN because of the DPF filter.
CCS
Apparent viscosity at cold start in mPa·s. The limit is 6200 at −35 °C for 0W, 6600 at −30 °C for 5W and 7000 at −25 °C for 10W. Lower means easier starting.
Pour point
The lowest temperature at which the oil still flows. Lower is better.
Flash point (COC)
The temperature at which vapours ignite, measured in an open cup. Higher usually means lower volatility.
Density
In g/cm³, usually given by manufacturers at 15 °C. Used for checking, not for rating.
HTHS
Viscosity at 150 °C and high shear in mPa·s. Shows bearing protection under load. ACEA A3/B4 and C3 require at least 3.5.
Sulphated ash
Ash content in % by weight. For engines with a DPF filter a low number matters; C3 allows at most 0.8 %.
Noack volatility
How many percent of the oil evaporates per hour at 250 °C. Lower means less oil consumption.
Did you know

The same oil, another name

These oils have identical laboratory values. Most likely it is the same oil sold under several names.

  • We found no oils with identical values in this class.
Chart

Class oils on a chart

Each dot is one oil from the current selection. Click a dot to open the oil's page. Oils without a value for the chosen parameter are not shown.

2.382.3852.392.3952.46.877.27.47.67.8Viscosity 100 °C (mm²/s)HTHS 150 °C (mPa·s)Valvoline Advanced Full Synthetic 0W-16 – Viscosity 100 °C: 6.8, HTHS 150 °C: 2.4Amsoil Signature Series 0W-16 – Viscosity 100 °C: 7.8, HTHS 150 °C: 2.4AMSOIL OE 0W-16 – Viscosity 100 °C: 7.2, HTHS 150 °C: 2.38AMALIE Elixir Full Synthetic 0W-16 – Viscosity 100 °C: 7.3, HTHS 150 °C: 2.4