EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Quaker State

Quaker State High Mileage 5W-20

Quaker State High Mileage 5W-20 is a 5W-20 engine oil (API SN · ILSAC GF-5). According to the manufacturer's data sheet it has a viscosity of 50 mm²/s at 40 °C, 8.6 mm²/s at 100 °C, a viscosity index of 152 and a pour point of −36 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-20 i
Viscosity 40 °C50 mm²/s47.75 mm²/s
Viscosity 100 °C8.6 mm²/s8.4 mm²/s
Viscosity index152 157.5
TBNnot stated
CCS −30 °C5000 mPa·s4397 mPa·s
Pour point−36 °C−42 °C
Flash point198 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows.225 °C
Density0.853 g/cm³0.85 g/cm³
HTHS 150 °Cnot stated
Sulphated ashnot stated

All 5W-20 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SN · ILSAC GF-5
Oils by specification

Similar oils

Oils in the 5W-20 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-20 class.

Quaker State High Mileage 5W-20 is a motor oil from Quaker State, viscosity grade 5W-20. In the database we compare it with 22 other oils in the 5W-20 class.

The oil meets API SN, ILSAC GF-5. API SN is an older American specification for petrol engines. ILSAC GF-5 is an older US–Japanese specification for fuel-efficient petrol engines.

Viscosity at 100 °C is 8.6 mm²/s, near the upper end of the 6.9–9.3 mm²/s range for the summer grade 20. Within its class the oil is on the thick side, with more reserve at high temperatures.

Weaker values: viscosity index 152 is in the weaker half of the class (median 158); CCS 5000 mPa·s is in the weaker half of the class (median 4322); pour point −36 °C is among the weakest in the class (median −42).

Limit values: CCS 5000 mPa·s at −30 °C is 76 % of the SAE limit (6600 mPa·s).

Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.