EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Valvoline

Valvoline SynPower XL-IV C5 0W-20

Valvoline SynPower XL-IV C5 0W-20 is a 0W-20 engine oil (ACEA C5 · API SN). According to the manufacturer's data sheet it has a viscosity of 40 mm²/s at 40 °C, 8 mm²/s at 100 °C, a viscosity index of 177, a TBN of 8 mg KOH/g and a pour point of −60 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-20 i
Viscosity 40 °C40 mm²/s43 mm²/s
Viscosity 100 °C8 mm²/s8.2 mm²/s
Viscosity index177 173.5
TBN8 mg KOH/g8.2 mg KOH/g
CCS −35 °Cnot stated
Pour point−60 °C−48 °C
Flash point228 °C226 °C
Density0.836 g/cm³0.842 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA C5 requires 2.6 to less than 2.9 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA C5 allows at most 0.8 %.

All 0W-20 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C5 · API SN
Oils by specification

Similar oils

Oils in the 0W-20 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.

Valvoline SynPower XL-IV C5 0W-20 is a motor oil from Valvoline, viscosity grade 0W-20. In the database we compare it with 38 other oils in the 0W-20 class.

The oil meets ACEA C5, API SN, VW 508 00, VW 509 00 and more (5 in total). ACEA C5 is a fuel-economy specification with low HTHS (2.6–2.9 mPa·s) for newer DPF engines. API SN is an older American specification for petrol engines. VW 508 00 / 509 00 are VW approvals for newer engines using 0W-20 oils.

Viscosity at 100 °C is 8 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.

Strengths: pour point −60 °C is among the best 10 % in the class (median −48).

Average values: viscosity index 177 is close to the class middle (median 174); TBN 8 mg KOH/g is close to the class middle (median 8.2); flash point 228 °C is close to the class middle (median 228).

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.