EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Bizol

BIZOL Protect 5W-40

BIZOL Protect 5W-40 is a 5W-40 engine oil (ACEA A3/B4 · API SN, CF). According to the manufacturer's data sheet it has a viscosity of 89 mm²/s at 40 °C, 14.3 mm²/s at 100 °C, a viscosity index of 169, a TBN of 10.8 mg KOH/g, a pour point of −39 °C and sulphated ash of 0.9 %.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-40 i
Viscosity 40 °C89 mm²/s86 mm²/s
Viscosity 100 °C14.3 mm²/s14.2 mm²/s
Viscosity index169 172
TBN10.8 mg KOH/g10.2 mg KOH/g
CCS −30 °Cnot stated
Pour point−39 °C−42 °C
Flash point200 °C230 °C
Density0.855 g/cm³0.853 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA A3/B4 requires at least 3.5 mPa·s.
Sulphated ash0.9 %1.23 %
Noack volatility11 %

All 5W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A3/B4 · API SN, CF
Oils by specification

Similar oils

Oils in the 5W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 class.

BIZOL Protect 5W-40 is a motor oil from Bizol, viscosity grade 5W-40. In the database we compare it with 69 other oils in the 5W-40 class.

The oil meets ACEA A3/B4, API SN, API CF, MB 229.3 and more (14 in total). ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s. API SN is an older American specification for petrol engines. Renault RN0700 and RN0710 are Renault/Dacia approvals for petrol and older diesel engines.

Viscosity at 100 °C is 14.3 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.

Strengths: TBN 10.8 mg KOH/g is in the top quarter of the class (median 10.1).

Weaker values: viscosity index 169 is among the weakest in the class (median 172); pour point −39 °C is in the weaker half of the class (median −42); flash point 200 °C is among the weakest in the class (median 230); Noack volatility 11 % is among the weakest in the class (median 7.4).

Limit values: sulphated ash of 0.9 % is higher; the oil is not intended for engines with a DPF.

Based on its values it suits engines without a DPF. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, so we cannot compare it on this parameter.