Castrol EDGE Supercar 5W-50
Castrol EDGE Supercar 5W-50 is a 5W-50 engine oil (API SN). According to the manufacturer's data sheet it has a viscosity of 102 mm²/s at 40 °C, 16.7 mm²/s at 100 °C, a viscosity index of 177, a pour point of −39 °C and sulphated ash of 0.78 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-50 i |
|---|---|---|
| Viscosity 40 °C | 102 mm²/s | 123 mm²/s |
| Viscosity 100 °C | 16.7 mm²/s | 19.3 mm²/s |
| Viscosity index | 177 | 179 |
| TBN | not stated | |
| CCS −30 °C | 5800 mPa·s | 6000 mPa·s |
| Pour point | −39 °C | −40.5 °C |
| Flash point | 220 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows. | 226 °C |
| Density | 0.853 g/cm³ | 0.853 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | 0.78 % |
All 5W-50 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SN
- Oils by specification
Similar oils
Oils in the 5W-50 class with the closest parameters and the same specification.
- Lucas Synthetic 5W-50API SP
- Valvoline VR1 Racing 5W-50ACEA A3/B4 · API SL
- Motorcraft 5W-50 Full SyntheticAPI SN
- AMALIE Elixir Full Synthetic 5W-50API SP
- Amsoil Signature Series 5W-50API SQ, SP, SN Plus
- Red Line 5W-50ACEA A3/B3, A3/B4 · API SN
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-50 class.
Castrol EDGE Supercar 5W-50 is a motor oil from Castrol, viscosity grade 5W-50. In the database we compare it with 6 other oils in the 5W-50 class.
The oil meets API SN, Ford WSS-M2C931-C. API SN is an older American specification for petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 16.7 mm²/s, near the lower end of the 16.3–21.9 mm²/s range for the summer grade 50. Within its class the oil is on the thin side, which helps fuel economy.
Average values: pour point −39 °C is close to the class middle (median −39).
Weaker values: viscosity index 177 is among the weakest in the class (median 179).
Limit values: CCS 5800 mPa·s at −30 °C is 88 % of the SAE limit (6600 mPa·s); sulphated ash of 0.78 % is suitable for engines with a DPF.
Based on its values it suits engines with a DPF and everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, TBN and Noack volatility, so we cannot compare it on these parameters.