Motorcraft 5W-50 Full Synthetic
Motorcraft 5W-50 Full Synthetic is a 5W-50 engine oil (API SN). According to the manufacturer's data sheet it has a viscosity of 136 mm²/s at 40 °C, 21 mm²/s at 100 °C and a viscosity index of 181.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-50 i |
|---|---|---|
| Viscosity 40 °C | 136 mm²/s | 123 mm²/s |
| Viscosity 100 °C | 21 mm²/s | 19.3 mm²/s |
| Viscosity index | 181 | 179 |
| TBN | not stated | |
| CCS −30 °C | 5900 mPa·s | 6000 mPa·s |
| Pour point | −42 °CThe manufacturer gives only a limit, "less than −42", not a measured value. | −40.5 °C |
| Flash point | 229 °C | 226 °C |
| Density | 0.865 g/cm³ | 0.853 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated |
All 5W-50 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SN
- Oils by specification
Similar oils
Oils in the 5W-50 class with the closest parameters and the same specification.
- Valvoline VR1 Racing 5W-50ACEA A3/B4 · API SL
- Lucas Synthetic 5W-50API SP
- Castrol EDGE Supercar 5W-50API SN
- Red Line 5W-50ACEA A3/B3, A3/B4 · API SN
- Amsoil Signature Series 5W-50API SQ, SP, SN Plus
- AMALIE Elixir Full Synthetic 5W-50API SP
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-50 class.
Motorcraft 5W-50 Full Synthetic is a motor oil from Ford, viscosity grade 5W-50. In the database we compare it with 6 other oils in the 5W-50 class.
The oil meets API SN. API SN is an older American specification for petrol engines.
Viscosity at 100 °C is 21 mm²/s, near the upper end of the 16.3–21.9 mm²/s range for the summer grade 50. Within its class the oil is on the thick side, with more reserve at high temperatures.
Average values: viscosity index 181 is close to the class middle (median 179); flash point 229 °C is close to the class middle (median 228).
Limit values: CCS 5900 mPa·s at −30 °C is 89 % of the SAE limit (6600 mPa·s).
Based on its values it suits higher loads, towing or high-mileage engines. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.