EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Castrol

Castrol MAGNATEC 5W-30 C2

Castrol MAGNATEC 5W-30 C2 is a 5W-30 C3 engine oil (ACEA C2). According to the manufacturer's data sheet it has a viscosity of 51 mm²/s at 40 °C, 9.5 mm²/s at 100 °C, a viscosity index of 172, a pour point of −39 °C and sulphated ash of 0.56 %.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 C3 i
Viscosity 40 °C51 mm²/s70 mm²/s
Viscosity 100 °C9.5 mm²/s12 mm²/s
Viscosity index172 168
TBNnot stated
CCS −30 °C4100 mPa·s5881 mPa·s
Pour point−39 °C−42 °C
Flash point220 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows.230 °C
Density0.849 g/cm³0.851 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA C2 requires at least 2.9 mPa·s.
Sulphated ash0.56 %0.795 %

All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C2
Oils by specification

Similar oils

Oils in the 5W-30 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.

Castrol MAGNATEC 5W-30 C2 is a motor oil from Castrol, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.

The oil meets ACEA C2, PSA B71 2290. ACEA C2 is a low-ash oil with reduced HTHS (from 2.9 mPa·s) for DPF engines where the carmaker wants lower friction.

Viscosity at 100 °C is 9.5 mm²/s, near the lower end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thin side, which helps fuel economy.

Strengths: viscosity index 172 is in the top quarter of the class (median 168); CCS 4100 mPa·s is among the best 10 % in the class (median 5850).

Weaker values: pour point −39 °C is in the weaker half of the class (median −42).

Limit values: CCS 4100 mPa·s at −30 °C is 62 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve; sulphated ash of 0.56 % is suitable for engines with a DPF.

Based on its values it suits engines with a DPF, everyday driving where fuel economy matters most and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, TBN and Noack volatility, so we cannot compare it on these parameters.