EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Valvoline

Valvoline SynPower ENV C2 5W-30

Valvoline SynPower ENV C2 5W-30 is a 5W-30 C3 engine oil (ACEA C2, A5/B5 · API SN, CF). According to the manufacturer's data sheet it has a viscosity of 60 mm²/s at 40 °C, 10.6 mm²/s at 100 °C, a viscosity index of 167 and a pour point of −39 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 C3 i
Viscosity 40 °C60 mm²/s70 mm²/s
Viscosity 100 °C10.6 mm²/s12 mm²/s
Viscosity index167 168
TBNnot stated
CCS −30 °Cnot stated
Pour point−39 °C−42 °C
Flash point240 °C230 °C
Density0.852 g/cm³0.851 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA C2 requires at least 2.9 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA C2 allows at most 0.8 %.

All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C2, A5/B5 · API SN, CF
Oils by specification

Similar oils

Oils in the 5W-30 C3 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.

Valvoline SynPower ENV C2 5W-30 is a motor oil from Valvoline, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.

The oil meets ACEA C2, ACEA A5/B5, API SN, API CF. ACEA C2 is a low-ash oil with reduced HTHS (from 2.9 mPa·s) for DPF engines where the carmaker wants lower friction. ACEA A5/B5 is a fuel-economy specification with reduced HTHS for engines without a DPF. API SN is an older American specification for petrol engines.

Viscosity at 100 °C is 10.6 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: flash point 240 °C is among the best 10 % in the class (median 230).

Average values: viscosity index 167 is close to the class middle (median 168).

Weaker values: pour point −39 °C is in the weaker half of the class (median −42).

The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.