Petronas Selenia WR Pure Energy 5W-30
Petronas Selenia WR Pure Energy 5W-30 is a 5W-30 C3 engine oil (ACEA C2). According to the manufacturer's data sheet it has 9.7 mm²/s at 100 °C, a viscosity index of 151, a TBN of 7 mg KOH/g and a pour point of −50 °C.
Data sheet ↗ Data verified: 8 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 C3 i |
|---|---|---|
| Viscosity 40 °C | not stated | |
| Viscosity 100 °C | 9.7 mm²/s | 12 mm²/s |
| Viscosity index | 151 | 168 |
| TBN | 7 mg KOH/g | 7.4 mg KOH/g |
| CCS −30 °C | not stated | |
| Pour point | −50 °C | −42 °C |
| Flash point | 245 °C | 230 °C |
| Density | 0.855 g/cm³ | 0.851 g/cm³ |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA C2 requires at least 2.9 mPa·s. | |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA C2 allows at most 0.8 %. |
All 5W-30 C3 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA C2
- Oils by specification
Similar oils
Oils in the 5W-30 C3 class with the closest parameters and the same specification.
- Castrol MAGNATEC 5W-30 C2ACEA C2
- Valvoline SynPower ENV C2 5W-30ACEA C2, A5/B5 · API SN, CF
- MANNOL Energy Premium 5W-30ACEA C2, C3 · API SN/CH-4
- Mannol 7709 O.E.M. 5W-30ACEA C2, C3, A5/B5 · API SN, CF
- Fanfaro VDX 5W-30 C3ACEA C2, C3 · API SN/CH-4
- MANNOL Diesel TDI 5W-30ACEA C2, C3 · API SN/CH-4
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 C3 class.
Petronas Selenia WR Pure Energy 5W-30 is a motor oil from Petronas, viscosity grade 5W-30. In the database we compare it with 120 other oils in the 5W-30 C3 class.
The oil meets ACEA C2, Fiat 9.55535-S1. ACEA C2 is a low-ash oil with reduced HTHS (from 2.9 mPa·s) for DPF engines where the carmaker wants lower friction.
Viscosity at 100 °C is 9.7 mm²/s, near the lower end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thin side, which helps fuel economy.
Strengths: pour point −50 °C is among the best 10 % in the class (median −42); flash point 245 °C is among the best 10 % in the class (median 230).
Weaker values: viscosity index 151 is among the weakest in the class (median 168); TBN 7 mg KOH/g is in the weaker half of the class (median 7.4).
Based on its values it suits everyday driving where fuel economy matters most. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.