EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol 7706 O.E.M. 5W-30

Mannol 7706 O.E.M. 5W-30 is a 5W-30 engine oil (ACEA C4). According to the manufacturer's data sheet it has a viscosity of 71.6 mm²/s at 40 °C, 12.3 mm²/s at 100 °C, a viscosity index of 171, a TBN of 7.8 mg KOH/g and a pour point of −42 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 i
Viscosity 40 °C71.6 mm²/s68.55 mm²/s
Viscosity 100 °C12.3 mm²/s11.7 mm²/s
Viscosity index171 168
TBN7.8 mg KOH/g10.2 mg KOH/g
CCS −30 °C5879 mPa·s5927 mPa·s
Pour point−42 °C−42 °C
Flash point222 °C225 °C
Density0.85 g/cm³0.852 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA C4 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA C4 allows at most 0.5 %.

All 5W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C4
Oils by specification

Similar oils

Oils in the 5W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.

Mannol 7706 O.E.M. 5W-30 is a motor oil from Mannol, viscosity grade 5W-30. In the database we compare it with 34 other oils in the 5W-30 class.

The oil meets ACEA C4, Renault RN0720, MB 226.51, MB 229.51. ACEA C4 is a low-ash oil (max 0.5 % ash) with HTHS from 3.5 mPa·s, typical for Renault and Mercedes. MB 229.51 is the Mercedes-Benz approval for engines with a DPF. Renault RN0720 is the Renault approval for diesel engines with a DPF.

Viscosity at 100 °C is 12.3 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: viscosity index 171 is in the top quarter of the class (median 168).

Average values: CCS 5879 mPa·s is close to the class middle (median 5790); pour point −42 °C is close to the class middle (median −42).

Weaker values: TBN 7.8 mg KOH/g is among the weakest in the class (median 10.2); flash point 222 °C is among the weakest in the class (median 227).

Limit values: CCS 5879 mPa·s at −30 °C is 89 % of the SAE limit (6600 mPa·s).

Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.