EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol 7719 O.E.M 0W-40

Mannol 7719 O.E.M 0W-40 is a 0W-40 engine oil (ACEA C3). According to the manufacturer's data sheet it has a viscosity of 72.21 mm²/s at 40 °C, 12.77 mm²/s at 100 °C, a viscosity index of 178, HTHS of 3.5 mPa·s, a TBN of 8.1 mg KOH/g and a pour point of −45 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-40 i
Viscosity 40 °C72.21 mm²/s75.7 mm²/s
Viscosity 100 °C12.77 mm²/s13.35 mm²/s
Viscosity index178 181
TBN8.1 mg KOH/g10.1 mg KOH/g
CCS −35 °C5968 mPa·s5950 mPa·s
Pour point−45 °C−48 °C
Flash point224 °C226 °C
Density0.83 g/cm³0.844 g/cm³
HTHS 150 °C3.5 mPa·s3.64 mPa·s
Sulphated ashnot statedNot stated by the manufacturer. ACEA C3 allows at most 0.8 %.

All 0W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C3
Oils by specification

Similar oils

Oils in the 0W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-40 class.

Mannol 7719 O.E.M 0W-40 is a motor oil from Mannol, viscosity grade 0W-40. In the database we compare it with 43 other oils in the 0W-40 class.

The oil meets ACEA C3. ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter.

Viscosity at 100 °C is 12.77 mm²/s, near the lower end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thin side, which helps fuel economy.

Average values: CCS 5968 mPa·s is close to the class middle (median 5925).

Weaker values: viscosity index 178 is among the weakest in the class (median 182); HTHS 3.5 mPa·s is among the weakest in the class (median 3.7); TBN 8.1 mg KOH/g is among the weakest in the class (median 10.1); pour point −45 °C is in the weaker half of the class (median −48); flash point 224 °C is in the weaker half of the class (median 228).

Limit values: HTHS 3.5 mPa·s meets the 3.5 mPa·s minimum required for this class; CCS 5968 mPa·s at −35 °C is 96 % of the SAE limit (6200 mPa·s), leaving little cold-start reserve.

Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility and sulphated ash, so we cannot compare it on these parameters.