Mannol Special 10W-40
Mannol Special 10W-40 is a 10W-40 engine oil (API SG, CD). According to the manufacturer's data sheet it has a viscosity of 105.91 mm²/s at 40 °C, 15.62 mm²/s at 100 °C, a viscosity index of 156, a TBN of 6.1 mg KOH/g and a pour point of −38 °C.
Data sheet ↗ Data verified: 3 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 10W-40 i |
|---|---|---|
| Viscosity 40 °C | 105.91 mm²/s | 96.805 mm²/s |
| Viscosity 100 °C | 15.62 mm²/s | 14.32 mm²/s |
| Viscosity index | 156 | 154 |
| TBN | 6.1 mg KOH/g | 9.5 mg KOH/g |
| CCS −25 °C | 6150 mPa·s | 6460 mPa·s |
| Pour point | −38 °C | −36 °C |
| Flash point | 224 °C | 225.5 °C |
| Density | 0.87 g/cm³ | 0.869 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated |
All 10W-40 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
Similar oils
Oils in the 10W-40 class with the closest parameters and the same specification.
- Millers oils CFS 10W-40
- Fanfaro TSN 10W-40ACEA A3/B4 · API SN/CH-4
- Yacco VX 300 10W-40ACEA A3/B4 · API SL/CF
- Eurol TurboCat 10W-40ACEA A3/B3 · API SL/CF
- Eurol Supreme Classic 10W-40ACEA A3/B4 · API SJ/SL
- MOTUL 6100 SYNERGIE+ 10W-40ACEA A3/B4 · API SN/CF
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 10W-40 class.
Mannol Special 10W-40 is a motor oil from Mannol, viscosity grade 10W-40. In the database we compare it with 79 other oils in the 10W-40 class.
The oil meets API SG, API CD, MB 229.1, VW 501 01 and more (5 in total).
Viscosity at 100 °C is 15.62 mm²/s, near the upper end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thick side, with more reserve at high temperatures.
Average values: viscosity index 156 is close to the class middle (median 154); CCS 6150 mPa·s is close to the class middle (median 6396); pour point −38 °C is close to the class middle (median −36).
Weaker values: TBN 6.1 mg KOH/g is among the weakest in the class (median 9.5); flash point 224 °C is in the weaker half of the class (median 226).
Limit values: CCS 6150 mPa·s at −25 °C is 88 % of the SAE limit (7000 mPa·s).
Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.