Quaker State Advanced Durability 5W-30
Quaker State Advanced Durability 5W-30 is a 5W-30 engine oil (API SN · ILSAC GF-5). According to the manufacturer's data sheet it has a viscosity of 63.4 mm²/s at 40 °C, 10.6 mm²/s at 100 °C, a viscosity index of 158 and a pour point of −33 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 i |
|---|---|---|
| Viscosity 40 °C | 63.4 mm²/s | 61.2 mm²/s |
| Viscosity 100 °C | 10.6 mm²/s | 10.7 mm²/s |
| Viscosity index | 158 | 166 |
| TBN | not stated | |
| CCS −30 °C | 5840 mPa·s | 4965 mPa·s |
| Pour point | −33 °C | −42 °C |
| Flash point | 218 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows. | 230 °C |
| Density | 0.856 g/cm³ | 0.851 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated |
All 5W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SN · ILSAC GF-5
- Oils by specification
Similar oils
Oils in the 5W-30 class with the closest parameters and the same specification.
- Ford Motorcraft 5W-30 Full SyntheticAPI SN · ILSAC GF-5
- Castrol EDGE 5W-30 (US)API SQ · ILSAC GF-7
- Pennzoil Full Synthetic 5W-30API SP · ILSAC GF-6A
- Quaker State Ultimate Durability 5W-30API SN · ILSAC GF-5
- Pennzoil Ultra Platinum 5W-30ACEA A1/B1, A5/B5 · API SN · ILSAC GF-5
- Castrol EDGE High Mileage 5W-30API SQ · ILSAC GF-7
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.
Quaker State Advanced Durability 5W-30 is a motor oil from Quaker State, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.
The oil meets API SN, ILSAC GF-5, Chrysler MS-6395, Ford WSS-M2C929-A and more (5 in total). API SN is an older American specification for petrol engines. ILSAC GF-5 is an older US–Japanese specification for fuel-efficient petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 10.6 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.
Weaker values: viscosity index 158 is in the weaker half of the class (median 166); CCS 5840 mPa·s is among the weakest in the class (median 4900); pour point −33 °C is among the weakest in the class (median −42).
Limit values: CCS 5840 mPa·s at −30 °C is 88 % of the SAE limit (6600 mPa·s).