EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Quaker State

Quaker State Ultimate Durability 5W-30

Quaker State Ultimate Durability 5W-30 is a 5W-30 engine oil (API SN · ILSAC GF-5). According to the manufacturer's data sheet it has a viscosity of 60 mm²/s at 40 °C, 10.8 mm²/s at 100 °C, a viscosity index of 178 and a pour point of −42 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 i
Viscosity 40 °C60 mm²/s61.2 mm²/s
Viscosity 100 °C10.8 mm²/s10.7 mm²/s
Viscosity index178 166
TBNnot stated
CCS −30 °C4930 mPa·s4965 mPa·s
Pour point−42 °C−42 °C
Flash point237 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows.230 °C
Density0.84 g/cm³0.851 g/cm³
HTHS 150 °Cnot stated
Sulphated ashnot stated
Noack volatility8.6 %

All 5W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SN · ILSAC GF-5
Oils by specification

Similar oils

Oils in the 5W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.

Quaker State Ultimate Durability 5W-30 is a motor oil from Quaker State, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.

The oil meets API SN, ILSAC GF-5, GM dexos1, Chrysler MS-6395 and more (7 in total). API SN is an older American specification for petrol engines. ILSAC GF-5 is an older US–Japanese specification for fuel-efficient petrol engines. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.

Viscosity at 100 °C is 10.8 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: viscosity index 178 is among the best 10 % in the class (median 166); Noack volatility 8.6 % is in the top quarter of the class (median 9.4).

Average values: CCS 4930 mPa·s is close to the class middle (median 4900); pour point −42 °C is close to the class middle (median −42).

Limit values: CCS 4930 mPa·s at −30 °C is 75 % of the SAE limit (6600 mPa·s).

The data sheet does not state HTHS, TBN and sulphated ash, so we cannot compare it on these parameters.