EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Ravenol

RAVENOL RCS Racing Competition Synto SAE 5W-40

RAVENOL RCS Racing Competition Synto SAE 5W-40 is a 5W-40 engine oil (5W-40). According to the manufacturer's data sheet it has a viscosity of 93.9 mm²/s at 40 °C, 15.03 mm²/s at 100 °C, a viscosity index of 168, HTHS of 4.26 mPa·s, a TBN of 12.5 mg KOH/g, a pour point of −57 °C and sulphated ash of 1.3 %.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-40 i
Viscosity 40 °C93.9 mm²/s86 mm²/s
Viscosity 100 °C15.03 mm²/s14.2 mm²/s
Viscosity index168 172
TBN12.5 mg KOH/g10.2 mg KOH/g
CCS −30 °C6200 mPa·s6200 mPa·s
Pour point−57 °C−42 °C
Flash point246 °C230 °C
Density0.848 g/cm³Density is given at 20 °C (most manufacturers state it at 15 °C).0.853 g/cm³
HTHS 150 °C4.26 mPa·s3.9 mPa·s
Sulphated ash1.3 %1.23 %
Noack volatility5.7 %

All 5W-40 oils → See the class table for a detailed comparison with other oils.

Similar oils

Oils in the 5W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 class.

RAVENOL RCS Racing Competition Synto SAE 5W-40 is a motor oil from Ravenol, viscosity grade 5W-40. In the database we compare it with 69 other oils in the 5W-40 class.

The data sheet lists no specifications or carmaker approvals, so it only suits engines whose manual does not require a specific approval.

Viscosity at 100 °C is 15.03 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.

Strengths: HTHS 4.3 mPa·s is among the best 10 % in the class (median 3.9); TBN 12.5 mg KOH/g is among the best 10 % in the class (median 10.1); pour point −57 °C is among the best 10 % in the class (median −42); flash point 246 °C is among the best 10 % in the class (median 230); Noack volatility 5.7 % is among the best 10 % in the class (median 7.4).

Average values: CCS 6200 mPa·s is close to the class middle (median 6160).

Weaker values: viscosity index 168 is among the weakest in the class (median 172).

Limit values: HTHS 4.3 mPa·s meets the 3.5 mPa·s minimum required for this class; CCS 6200 mPa·s at −30 °C is 94 % of the SAE limit (6600 mPa·s), leaving little cold-start reserve; sulphated ash of 1.3 % is higher; the oil is not intended for engines with a DPF.

Based on its values it suits engines without a DPF. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.